Eurotops BK589 Instruction Manual

BK589/ 48562
BEFORE USING: In order to start the watch, please remove the plastic stopper
first, and then push the crown against the watch.

Battery: 1 x SR621SW, 1,5V

3 ATM

Band: Cowhide leather (upper part), polyurethane (lower part)

To prolong the appearance of your watch, avoid conctact with the following :Perfumes, hairspray,
cosmetics, detergents, adhesives and paints as they cause discoloration, deterioration and damage.

To help prevent possible damage from perspiration, dust and moisture, periodically wipe your watch
with a soft dry cloth.

To ensure lasting durability please take note of the following points: Never attempt to open the case of
your watch. Batteries should be replaced by a qualified technician.
WARNING: You should not dispose of this device with your household waste. A selective collection system for
this type of product is implemented by your local authorities. Please contact your local authorities to find out
how and where collection takes place. These restrictions apply because electrical and electronic devices
contain dangerous substances that have harmful effects on the environment or on human health and must be
recycled.
This symbol indicates that electrical and electronic devices are collected selectively. The symbol shows a
waste container crossed out with an X symbol.
Imported by EML – Trading name: PRODIS, 1 rue de Rome, 93110 Rosny-sous-Bois, France/ Made in
PRC
Marketed by EUROtops VERSAND GMBH D-40764 LANGENFELD, Germany
INSTRUCTION MANUAL
SETTING THE TIME AND THE DATE
Position 0 : Normal running position
Position 1 : Setting of the date

Gently pull the crown to position 1 and turn it
counterclockwise to set the date.

Push the crown to position 0 to confirm and complete the
setting.
To enable the change of the date the next day, the date must
be set between 1 am and 8 pm.
Position 2 : Setting of the time

Gently pull the crown to position 2 and then turn it one or
other direction to set the time.

Push the crown back into the position 0 to confirm and
finish.
WARNING
English