Eurotops BK401 Instruction Manual

Led watch

Advertisement

Available languages

Available languages

LED watch - Instruction manual
A. PRODUCT DESCRIPTION
B. FEATURES:
1. Display month, day, hour, minute and seconds;
2. 12H/24H hour format;
3. AM/PM;
4. 3 seconds stop state: when you press the button (A or B), the led light will last 3
seconds.
C. BATTERY
Battery required: 1 CR2016 Lithium cell battery.
When the display LED lights dimmed, the battery has to be replaced. In order to replace the
batteries, please take your watch to the nearest watch repair shop or watchmaker.
D. READING TIME
Press A button to show the current time.
Press A button once more to show month and date, and then press again to
show seconds.
Note : If the display is in 12-hour format, the hours corresponding to the
afternoon will be preceded by an apostrophe located in left position. This
sign enables to distinguish the hours in the afternoon from the hours
corresponding to the morning (See figure in the opposite).
E. TIME SETTING
Time settings: press A button to display the current time, then click the B button until the hours
will be flashing. Press A button to set the hours till you get the correct hour.
Renew the same procedure to adjust the minutes month, day, year and 12/24h
format to the desired value: press B button, and the minutes, month, day,
year and 12/24h format (it depends on what you want to adjust) will be flashing,
and then press A to get the desired value for minutes month, day, year and
12/24h format.
Note: In order to remove the links in the watch band, please take your watch to the
nearest watch repair shop or watchmaker.
WARNING: You should not dispose of this device with your household waste. A selective
collection system for this type of product is implemented by your local authorities. Please
contact your local authorities to find out how and where collection takes place. These restrictions
apply because electrical and electronic devices contain dangerous substances that have harmful
effects on the environment or on human health and must be recycled.
This symbol indicates that electrical and electronic devices are collected selectively. The symbol
shows a waste container crossed out with an X symbol.
Imported by Prodis SAS 1 rue de Rome F-93110 Rosny-sous-Bois/ Made in PRC
Marketed by EUROTOPS VERSAND GMBH D-40764 LANGENFELD
Time indicated on the dial: 22 :54
Key A:Time and date display
Key B: Set function
BK401

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BK401 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Eurotops BK401

  • Page 1 This symbol indicates that electrical and electronic devices are collected selectively. The symbol shows a waste container crossed out with an X symbol. Imported by Prodis SAS 1 rue de Rome F-93110 Rosny-sous-Bois/ Made in PRC Marketed by EUROTOPS VERSAND GMBH D-40764 LANGENFELD...
  • Page 2 Ce symbole indique que les équipements électriques et électroniques font l’objet d’une collecte sélective, il représente une poubelle sur roues barrée d’une croix. Importé par Prodis SAS 1 rue de Rome F-93110 Rosny-sous-Bois/ Fabriqué en RPC Commercialisé par EUROTOPS VERSAND GMBH D-40764 LANGENFELD...
  • Page 3 Dieses Symbol gibt an, dass die Entsorgung der Elektro- und Elektronikgeräte über ein Getrenntsammelsystem erfolgt. Es stellt eine Mülltonne mit Rädern dar, die durch ein Kreuz durchgestrichen ist. Importiert von prodis SAS 1 rue de Rome F-93110 Rosny-sous-Bois / Hergestellt in der VRC Vermarktung durch EUROTOPS VERSAND GMBH D-40764 LANGENFELD...
  • Page 4 Dit pictogram geeft aan dat de elektrische en elektronische apparatuur speciaal moeten worden ingezameld. Het pictogram bestaat uit een doorgekruiste container op wielen. Geïmporteerd door Prodis SAS 1 rue de Rome F-93110 Rosny-sous-Bois/ Gemaakt in de VRC/ Op de markt gebracht door EUROTOPS VERSAND GMBH D-40764 LANGENFELD...

Table of Contents