BK585/ 48578
BK586/ 48584
PLEASE READ THE MANUAL BEFORE YOUR FIRST USE. KEEP THIS MANUAL SAFE FOR
DESCRIPTION
Fig. 1
The reset operation should be done if you encounter the particular cases below:
A loss of synchronization between the hands and the internal saved RCC time - due to factors such
as magnetic fields, important shocks or strong vibrations.
If the watch fails to set itself correctly and RCC signal status has not been successfully received.
To ensure successful completion of reset procedure, the three hands should point to 12H. If it is not the
case, repeat procedure several times until they all point to 12H.
RESET procedure can only done if the time zone setting is EU.
1.
Press and hold button B until the LCD screen displays "RS", flashing. Important note: When
holding button B, "EU" will display flashing in the meanwhile BUT KEEP ON HOLDING UNTIL
"RS" DISPLAYS, FLASHING.
2.
A few seconds later, the minute hand first rotates. The 2 hands may take some time to rotate. WAIT,
BE PATIENT AND DO NOT PRESS BUTTON B UNTIL THE HOUR AND MINUTE HANDS STOP
ROTATING AND POSITION AT 12 O'CLOCK POSITION.
3.
When all hands points to 12 o'clock position, don't press any button and wait till the hands fast spin
and reach the internal (LCD) time. The watch will then show the correct time.
Note: In case the hands stop and do not position at 12 o'clock, press button B stepwise to set all
hands on 12 o'clock position or if the hands are far away from 12 o'clock or if the minute hand
accidentally goes beyond 12'o'clock, press and hold button B till the hands fast spin. When facing
the second situation, press button B stepwise to align minute and hour hands.
In normal time mode display, press A button to view the different types of information:
Press A once
Date
RCC WATCH
User's manual
FUTURE REFERENCE!
A. MODE
B. SET
Specifications
- 5 ATM
RESET
MODE FUNCTION
Press A once
D
ay of the
week
1
FEATURES
DCF Radio controlled signal reception
Automatic summertime (DST)
Calendar
Choice of language of day of the week :
German or English
- 1 x lithium CR2016 battery, 3V
Press A once
Seconds
English
RCC signal status
Press A once
Need help?
Do you have a question about the BK585 and is the answer not in the manual?
Questions and answers