Table of Contents
Advertisement
Quick Links
P
FURGUARD
STICK VACUUM
MODELS 4051, 4039
Important Safety Instructions .................. 2
Warranty ............................................................ 3
Assembly ...........................................................4
Charging the Battery .................................... 5
Using Your Vacuum .......................................6
Above-Floor Cleaning ..................................6
Emptying the Dirt Tank ............................... 7
Cleaning and Replacing the Filters ........ 8
Maintaining the Brush Roll ....................... 10
Troubleshooting ..............................................11
Product Overview
A. Hand Vacuum
B. Power Button
C. Mode Button
D. Battery Release Button
E. Battery
F. Dirt Tank Release Button
C
™
G. Hand Vac Release Button
H. Extension Wand
I. Wand Release Lever
J. Motorized Foot
K. Brush Roll Release
Meet your new BISSELL® product!
Go to support.BISSELL.com for a walkthrough of your new
purchase, including videos, tips, support, and more. Want to get
started right away? This guide has all the information you need to
set up your new product. Let's take a look...
®
E
D
C
B
A
F
G
H
I
J
K
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bissell PowerClean FURGUARD 4051
Summary of Contents for Bissell PowerClean FURGUARD 4051
- Page 1 F. Dirt Tank Release Button Meet your new BISSELL® product! Go to support.BISSELL.com for a walkthrough of your new purchase, including videos, tips, support, and more. Want to get started right away? This guide has all the information you need to...
-
Page 2: Important Safety Instructions
• With brush roll on, do not allow cleaner to sit in one location for an extended period of time, as damage to floor can result. 2 BISSELL.com... -
Page 3: Warranty
SUPPLIER’S DECLARATION OF CONFORMITY 47 CRF SECTION 2.1077 COMPLIANCE INFORMATION Charger adapter for BISSELL product. CONTACT: BISSELL Homecare Inc., 2345 Walker Ave. NW, Grand Rapids, MI 49544. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 4 Note: Use provided dry wall anchors unless drilling directly into a stud. 4. Connect charger to side of 5. Place vacuum on mount. 6. Attach tools to mount. They mount, then plug into wall. will click into place. 4 BISSELL.com...
-
Page 5: Charging The Battery
Charging on Unit Separate from Wall Mount 1. Power OFF. Plug charger into back of hand vacuum. Battery 2. Machine will take up to indicator lights flash when charging. 3 hours to charge. Battery lights will turn off when fully charged. BISSELL.com 5... -
Page 6: Using Your Vacuum
Using the Extension Wand 1. Power OFF. Use your foot to 2. Attach your desired tool. Note: The hand vacuum has a gently press the wand release lever. Pull up on hand vacuum built-in crevice tool. to remove. 6 BISSELL.com... -
Page 7: Emptying The Dirt Tank
4. Empty debris into waste 5. Reinstall separator. 6. Reinstall dirt tank by bin. aligning the bottom of the tank with the notch on the hand vacuum. Rotate the tank inward until it clicks into place. BISSELL.com 7... -
Page 8: Cleaning And Replacing The Filters
Note: A wet or with the foam filter on the damp filter will affect suction bottom. Insert the filter basket performance. into the hand vacuum, aligning the basket clip with the groove. Push the back upward until it clicks into place 8 BISSELL.com... - Page 9 Twist the post-motor filter clockwise to unlock and remove. 4. Wipe post-motor filter with 5. Reinstall by twisting 6. Reinstall pre-motor filter. a cloth to clean off any debris. counterclockwise back into machine. BISSELL.com 9...
-
Page 10: Maintaining The Brush Roll
7. Wipe brush roll and 8. Reinstall brush roll into the chamber with a dry cloth. tool. Note: Any other maintenance or servicing not included in this manual should be performed by an authorized service representative. 10 BISSELL.com... -
Page 11: Troubleshooting
Stalled brush roll. setting to avoid small rugs/carpet from stalling brush roll. Turn machine OFF and allow to cool before Blinking error lights Various reasons. turning back on. If this does not work, contact BISSELL Consumer Care. - Page 12 PROUDLY SUPPORT Every purchase makes it possible for BISSELL to continue our support of BISSELL Pet Foundation® and its mission of saving pets in need. Since 2011, BISSELL has donated over $26 million in support of BISSELL Pet Foundation®. When you purchase a BISSELL® product, you help save pets, too.
Need help?
Do you have a question about the PowerClean FURGUARD 4051 and is the answer not in the manual?
Questions and answers