Summary of Contents for Bissell CrossWave OmniFind 4007F
Page 1
CrossWave OmniFind ® ™ ALL-IN-ONE MULTI-SURFACE CLEANER 4007F, 4008H What’s in the Box? ......... 4 Assembly & Charging the Battery ..4 Cleaning Your Floors ........5 Sanitising Hard Floors ........6 Emptying the Dirty Water Tank ....6 Using the Clean-Out Cycle ......7 After-Cleaning Care ........
For indoor use only. textile. “W” on the tag as shown means you can use your cleaner. Do not expose to rain. Lock. Use only BISSELL® cleaning formulas intended for use with this machine. Do not freeze. Protection against moving parts. Direct current.
Page 3
• For the purposes of recharging the battery, only use the detachable supply • Unplug before connecting to docking station. unit provided with this appliance. • Use only with charger **SIL, Model SSC-297100AU** • Unplug charger from electrical socket when not in use, before cleaning, global.BISSELL.com 3...
Page 4
3. Place machine on tray and the body of the machine until wall. ensure charging icon is lit up. it clicks. Let charge for 4 hours or until battery reaches 100% charge. Remove cardboard insert from bottom of foot before first use. 4 global.BISSELL.com...
Empty the tank. *Compatible BISSELL formulas include: Hard Surface Sanitise & Multi-Surface Pet FEBREZE used under license from The Procter & Gamble Company or its affiliates. global.BISSELL.com 5...
Sanitizing Hard Floors BISSELL Hard Floor Sanitize formula is for use on hard, sealed floors only. Do not use on carpet or area rugs. Read formula container label fully prior to use. 1. Follow cleaning instructions to remove visible 2. Allow floor to remain visibly wet with messes.
Page 7
Rinse bottom of on filter and lifting up. Remove tank cover. Rinse all debris any debris from under filter. from dirty tank cover. CONTINUED ON NEXT PAGE global.BISSELL.com 7...
Page 8
10. Reinstall window by lining up tabs on bottom edges of foot and rotating towards machine. Press down until window clicks into place. Any other maintenance or servicing not included in this manual should be performed by an authorised service representative. 8 global.BISSELL.com...
Remove any blinking accumulated hair or debris from brush roll. Cleaning mode and clean out Motor error. Contact BISSELL Consumer Care. cycle lights flashing The battery is to be disposed of safely. See global.BISSELL.com for battery removal instructions. global.BISSELL.com 9...
You can find out about your legal rights and remedies by contacting BISSELL does not exclude or limit in any way its liability for (a) death your local consumer advice service. Nothing in this warranty will replace or personal injury caused by our negligence or the negligence of or lessen any of your legal rights or remedies.
Need help?
Do you have a question about the CrossWave OmniFind 4007F and is the answer not in the manual?
Questions and answers