Connecting The Antennas; Am Loop Antenna; Fm Indoor Antenna; Fm Outdoor Antenna - Kenwood VR-4090 Instruction Manual

Digital audio/video receiver
Hide thumbs Also See for VR-4090:
Table of Contents

Advertisement

Chapter One : Connecting Your Devices

AM Loop Antenna

FM 75
ANTENNA
GND
AM
Your new receiver comes with an AM loop antenna for AM
radio reception. To connect the AM antenna:
1. Insert the antenna loop into the base and position the
loop.
2. Open the receiver's antenna terminal levers.
3. Insert the antenna's wires into the terminal as shown
above.
4. Close the antenna terminal levers to lock the wires in
place.
5. Adjust the antenna loop as necessary to improve recep-
tion.
To prevent hum interference, keep the AM antenna wires
away from speaker wires, AC power cords, the TV chassis,
and the receiver.

Connecting the Antennas

FM Indoor Antenna

FM 75
ANTENNA
GND
Your new receiver also comes with an FM indoor antenna
for FM radio reception. To connect the FM antenna:
1. Attach the antenna sheath to the pole in the center of
the receiver's FM antenna jack, as shown above. When
you attach the sheath for the first time, you may need to
exert quite a bit of pressure.
2. Adjust the antenna as necessary to improve reception.
3. Tack the looped end of the antenna in the location that
provides the best reception.

FM Outdoor Antenna

FM 75
ANTENNA
GND
Kenwood recommends a permanently installed outdoor FM
antenna for best FM reception. To connect an outdoor FM
antenna:
1. Connect the antenna wire to a standard, commercially
available antenna adapter as shown above.
2. Connect the adapter to the receiver's FM antenna jack.

RF Remote Antenna

(VR-4090 and VR-4080 only)
AM
The Remote Control unit for the VR-4090/VR-4080 incor-
porates the RF transmission function. To make sure receiv-
ing the RF remote signal, connect the provided RF Remote
Antenna as described below.
1. Insert the jack of the provided RF Remote Antenna into
the receiver's RF REMOTE ANTENNA jack.
2. Distribute the antenna wire vertically and fix it.
Distribute the antenna away from the metallic panel.

What if I Have Cable Radio?

AM
If you have cable radio, contact your cable provider for as-
sistance with connecting to the VR-4090/VR-4080/KRF-
V7773D.
RF REMOTE ANTENNA
33
SYSTEM
CONTROL
SL 16
TEXT

Advertisement

Table of Contents
loading

This manual is also suitable for:

Krf-v7773dVr-4080

Table of Contents