Subscribe to Our Youtube Channel
Related Manuals for vollara AIR & SURFACE PRO+
Summary of Contents for vollara AIR & SURFACE PRO+
- Page 1 Model: A1040F Portable Air & Surface Purification System Read manual carefully for proper use and optimal operation.
-
Page 2: Table Of Contents
General Information Product Overview Congratulations on your purchase! Your new Vollara® Air & Surface Pro+ utilizes, remove our powerful, PCO–A (Photocatalytic Oxidation – Advanced) Technology, and other complementary technologies to provide 24/7 air purification and surface decontamination in indoor spaces up to 2,000 sq. ft. Please read and follow all safety warnings and instructions outlined in this owner’s manual, before operating or performing maintenance. -
Page 3: Important Safety Instructions
• The Depart Mode feature of this unit is to be operated in unoccupied areas only. No people or pets should be in the area Read this manual in its entirety before using your Vollara Air & Surface Pro+. Keep out of the reach of children. -
Page 4: Inspection & Installation
Inspection & Installation Remove protective packaging. Remove unit from shipping carton. Remove all protective materials. Check for shipping damage and loose or broken parts. Read Owner's Manual thoroughly prior to installation. Determine placement location for the unit (see "Operation" on page 6). Insert the Power Supply Plug into the power receptacle on the rear of the unit. -
Page 5: Settings & Notifications
Settings & Notifications The Vollara Air & Surface Pro+ can be turned on or off, and adjusted, using the control panel on the front of the unit. NOTE: If you are operating your central heating and air conditioning fan or other ventilation system continuously, set the coverage up to the total ventilated indoor area. -
Page 6: Led Display
Flicker: Replace PCO–A Cell Assembly Red Light: PCO–A Cell Assembly Malfunction Operation Do not operate the Vollara Air & Surface Pro+ without the Filter Assembly and Back Cover properly installed. WARNING • To prevent injury, be sure the Power Cord is not accessible to small children •... -
Page 7: Maintenance Reminders
The CELL indicator will illuminate if the PCO–A Cell Assembly is no longer working. To order a new PCO–A Cell Assembly, please contact your Vollara Independent Business Owner or Customer Service at 800.989.2299 or email customerservice@vollara.com. For optimal performance, we recommend that you replace the PCO–A Cell Assembly every 12 months if run 24/7/365. - Page 8 Please see above instructions for each indicator. For questions on maintenance procedures, please contact your Vollara Independent Business Owner or Customer Service at 800.989.2299 or email customerservice@vollara.com.
-
Page 9: General Maintenance
Representative may damage your unit and void your warranty Periodic maintenance is required to ensure that your Vollara Air & Surface Pro+ operates properly. The unit will display a CLEAN reminder when it’s time to perform regular maintenance. If you are operating your unit in a severely polluted environment, cleaning of the unit, Purification Plate, PCO–A Cell Assembly, and Filter Assembly should be done more frequently. -
Page 10: Filter Assembly
) production when the Purification Plate is at the end of its life. Filter Assembly Vollara filter technology makes the Vollara Air & Surface Pro+ incredibly quiet. Units come with one Filter Assembly and an optional HEPA Filter Sheet (installed). -
Page 11: Removing The Optional Hepa Filter Sheet
• DO NOT operate the aVollara Air & Surface Pro+ without the Filter Assembly and Back Cover WARNING properly installed Use genuine Vollara replacement parts only; parts from anyone other than Vollara may damage your unit and void your warranty. CAUTION... -
Page 12: Pco-A Cell Assembly
PCO–A Cell Assembly Our proprietary PCO–A Cell Assembly that is found in the Vollara Air & Surface Pro+ uses PCO–A Technology to produce molecules that inactivate contaminants found in the air and on surfaces in indoor spaces. For optimal performance we recommend that you replace the PCO–A Cell Assembly every 12 months if run 24/7/365. If run 12 hours or less per day, or less than 7 days per week, the PCO–A Cell Assembly should be changed every 24 months;... -
Page 13: Installing The Purification Plate & Pco-A Cell Assembly
Installing the Purification Plate & PCO–A Cell Assembly • Unplug the unit before performing any maintenance procedures • DO NOT operate the Vollara Air & Surface Pro+ without the Filter Assembly and Back Cover WARNING properly installed • For optimal performance and to maintain the limited 3 year warranty, it is required to replace the PCO–A Cell Assembly every year, even if the PCO–A Cell appears to be operating normally... -
Page 14: Troubleshooting
(see page 5 for more information). TROUBLESHOOTING — WHAT TO LOOK FOR FIRST I have plugged in the unit, pressed the ON button on the Vollara® Air & Surface Pro+, and nothing happens. What’s wrong? • Make sure the Power Cord is inserted completely into the receptacle on the back of the unit •... -
Page 15: Replacement Parts
Replacement Parts & Service Use genuine Vollara replacement parts only; Parts from anyone other than an authorized Vollara Representative may damage your unit and void your warranty. CAUTION REPLACEMENT PARTS PART NUMBER PCO–A Cell Assembly - (1) 6” Cell Assembly... -
Page 16: Warranty Information
Warranty Information Limit Three (3) Year Warranty To register your Vollara Air & Surface Pro+ unit, please visit vollaraintl.com/vollara/warrantyregistration.aspx or contact Customer Service at 800.989.2299 or email customerservice@vollara.com. Customer should not repackage and ship the Vollara Air & Surface Pro+ UNAUTHORIZED CHANNELS AND MISSING SERIAL NUMBERS unit due to possibility of irreparable damage. -
Page 17: Fcc Declaration & Responsible Party
FCC Declaration & Responsible Party FCC DECLARATION OF CONFORMITY This equipment has been tested and found to comply Name: Vollara® Air & Surface Pro+ with the limits for a Class B digital device, pursuant of part Model: A1041B 15 of the FCC Rules. These limits are designed to provide...
Need help?
Do you have a question about the AIR & SURFACE PRO+ and is the answer not in the manual?
Questions and answers