Alarm Operation; Setting The Alarm Time(S) - Timex T158 User Manual

Setting the Calendar
1. Press and hold the
2. Press the FWD/Month Button to set the month.
3. Press the REV/Date Button to set the date.
4. Press the 7•5•2/DST Button to set the day of the week.
5. Press the Calendar Set Button again to return the display to normal mode. You can
also allow the display to flash for approximately 8 seconds to return to normal mode.
Daylight-Saving Time Adjustment
Depending your living area to turn on or off the daylight saving time adjustment feature.
1. Press and hold the
2. Pressing the
feature on or off. The DST indicator will appear on the right side of display means daylight
saving time adjustment feature is on.
1. Press the Sounds On/Sleep Button once to turn on the sound.
2. Press the Sounds On/Sleep Button again to change to sleep mode so you can fall
asleep to nature sounds. Remaining sleep time will show on the display.
3. You can adjust sleep timer from 90, 60, 30 or 15 minutes by pressing the button again.
Pressing the button again when sleep to is at 15 minutes will turn off the nature sounds.
4. Press any of the four
The chosen nature sound's indicator will flash on the lower right side of the display.
5. Adjust the Volume Control as desired.
6. To avoid affecting the alarm sound level, you can adjust the sleep volume by pressing the
Sleep Volume Button as desired. The Sleep Volume icon will change to show volume selects.
7. To stop listening at anytime, press the
This clock features two alarms that can be set and used independently. You can set both
alarms to wake two people at different times, set alarm as a back-up to the other in case you
shut off the first alarm and go back to sleep, or use one alarm for weekdays and the other for
weekend wake up times.
Note: This clock also features "Sure Alarm" so that in the event a power failure occurs or the
AC adapter is accidentally disconnected, if you have installed a CR2032 battery, the
unit will change to Buzzer alarm to wake you up.
1. Press the Alarm Set Button until the display shows the Alarm Indicator for the alarm
to be set: Sounds or
2. Press the FWD/Month or
up. Remember to set the correct AM or PM time. The PM Indicator is located on the
upper left side of the time digits (there is no AM indicator).
3. Press the 7•5•2/DST Button to choose whether the alarm will come on everyday,
weekdays or weekend only.
4. Press the Alarm Set Button twice to return the display to normal mode. You can also
allow the display to flash for approximately 8 seconds to return to normal mode.
Calendar Set Button until the display begins flashing.
Time Set Button until the display begins flashing.
7•5•2/DST Button will toggle the DST (daylight saving time) adjustment
Listen/Sleep to Nature Sounds
Nature Sounds Buttons (Ocean, Brook, Forest and Wind Chime).

Alarm operation

Setting the Alarm Time(s)

Buzzer. The wake time for that alarm will flash.
REV/Date Button to adjust the time you want to wake
Off/Reset Button to turn off the sound.
7