CONTENTS SAFETY WARNINGS ….….……..…………………………………………..1 PRODUCT OVERVIEW ………………………….…….…….…………………5 PRODUCT INFORMATION ……………………………………………………6 BEFORE USING YOUR NEW CERAMIC HOB ……………………………….6 USING THE TOUCH CONTROLS ……………………………………………6 CHOOSING THE RIGHT COOKWARE ………….…….………………………7 USING YOUR CERAMIC HOB ………………………………………………8 DOUBLE ZONE FUNCTION …………………………………………………….9 LOCKING THE CONTROLS …………………………………………………10 USING THE TIMER ……………………………………………………………11 COOKING GUIDELINES...
SAFETY WARNINGS Your safety is important to us. Please read this information before using your cooktop. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. • Connection to a good earth wiring system is essential and mandatory. •...
Page 6
Operation and maintenance Electrical Shock Hazard • Do not cook on a broken or cracked cooktop. If the cooktop surface is break or crack,switch the appliance off immediately at the mains power supply (wall switch) and contact a qualified technician. •...
Page 7
• Do not leave children alone or unattended in the area where the appliance is in use. • Children or persons with a disability which limits their ability to use the appliance should have a responsible and competent person to instruct them in its use.
Page 8
shock, for hob surfaces of glass-ceramic or similar material which protect live parts •A steam cleaner is not to be used. •The appliance is not intended to be operated by means of an external timer or separate remote-control system. Congratulations on the purchase of your new Ceramic Hob. We recommend that you spend some time to read this Instruction / Installation Manual in order to fully understand how to install correctly and operate it.
USING YOUR CERAMIC HOB To start cooking • A er power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indica ng that the ceramic hob has entered the state of standby mode. 1.
When you have finished cooking 1. Touching the hea ng zone selec on control that you wish to switch off. 2. Turn the cooking zone off by touching the control“ — ” to ”0”. Make sure the display shows”0”. 3. Turn the whole cooktop off by touching the ON/OFF control.
Ac vate the double zone (e.g. power level is 6) 1. Press the hea ng zone selec on control of the double loop hea ng zone. 2. the power level indicator flash, then press ” ” , a er 5 seconds, the indicator stop flash, the double loop func on is ac vate, and power level shows “6”...
USING THE TIMER Using the Timer as a Minute Minder If you are not selec ng any cooking zone 1. Make sure the cooktop is turned on. Note: you can use the minute minder even if you’re not selec ng any cooking zones. 2.
Page 16
3. Adjust the mer se ng by touch the “-“ or “+” control. The minute minder indicator will start flashing and will show in the mer display. Hint: Touch the “-“ or “+” control of the mer once to decrease or increase by 1 minute. Touch and hold the or control of the mer to decrease or increase by 10 minutes.
Page 17
2. Touch the timer control, the timer indicator show “10”. 3. Set the me by touching the control of the mer. Hint: Touch the “-“ or “+” control of the mer once will decrease or increase by 1 minute. Touch and hold the “-“ or “+” control of the mer will decrease or increase by 10 minutes.
Page 18
Se ng the mer to turn more than one cooking zone off 1. If more than one hea ng zone use this func on, the mer indicator will show the lowest me. (e.g. zone 1# se ng me of 5 minutes, zone 2# se ng me of 15 minutes, the mer indicator shows “5”.) NOTE: The red dot next to power level indicator will flash.
Need help?
Do you have a question about the HE6243C and is the answer not in the manual?
Questions and answers