Setting And Adjusting Rebound Damping - Giant GLORY - SERVICE MANUAL V2.0 Service Manual

Hide thumbs Also See for GLORY - SERVICE MANUAL V2.0:

Specifications (1 page)

Manual (1 page)

Technical manual (1 page)

Table Of Contents

Table of Contents

Suspension Settings and Recommendations

Glory with Maestro

Giant's Maestro rear suspension design precisely positions the pivots and

linkages to give you efficient pedaling and small bump compliance. Maestro's

pivot placement allows the rear suspension to be completely active under

braking, allowing the rear wheel to react constantly to the terrain.

Maestro-equipped mountain bikes rely on rear suspension "sag". Sag is a

critical performance component and is relative to the individual rider's weight.

Giant's Glory frame designs and travel is intended for aggressive freeriding and

recreational/competitive downhill riding. The sag range can accommodate a

wide variety of riding styles and terrain.

GLORY Sag Recommendations

The Giant Glory are downhill-specific bicycles made for both recreational and

competitive downhill riding and extreme freeriding. The multi-tunable shock can

be almost infinitely adjusted for all types of terrain and riding styles.

Glory Sag Recommendation:

EYE-TO-EYE

Freeriding: .75" (19.0mm)

9.5" (240mm)

Downhill: .90" (22.8mm)

For Manitou 6-Way coil shock tuning set-up (high-speed and low speed

compression damping, SPV pressure and volume), please refer to shock

manufacturer's technical manual.

NOTE: These settings must be made prior to standard sag and rebound

damping settings.