1. Manuals
  2. Brands
  3. DAV TECH Manuals
  4. Control Unit
  5. EVO E2K
  6. Use and maintenance manual

DAV TECH EVO E2K Use And Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
COD.: DTVI_EVO_2443
REV.: 04
DATE: 23/05/2025
EVO CONTROL UNITS
TRANSLATED FROM ORIGINAL
Read carefully before use!
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVO E2K and is the answer not in the manual?

Questions and answers

Related Manuals for DAV TECH EVO E2K

Summary of Contents for DAV TECH EVO E2K

  • Page 1 EVO CONTROL UNITS COD.: DTVI_EVO_2443 TRANSLATED FROM ORIGINAL REV.: 04 Read carefully before use! DATE: 23/05/2025...

  • Page 2: Table Of Contents

    Interface Screen ..........................62 6.4.5 Interface screen (MODBUS Registers) ..................... 63 COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...
  • Page 3 9.2.5 E2K EVO Controller Alarms ......................83 END OF LIFE ............................ 84 COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 4: General Information

    In case of doubts about the interpretation or reading of this document, please contact the manufacturer. DAV Tech disclaims all responsibility relating to improper use of the component. Comply with what is specified in this manual.

  • Page 5: Symbology

    Qualified technician made available by the manufacturer to perform complex operations in particular situations, or in any case according to what has been agreed with the customer. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 6: Reference Standards

    COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 7: Declaration Of Incorporation (Annex Ii B Dir. 2006/42/Ec)

    USE AND MAINTENANCE MANUAL 1.3 Declaration of incorporation (Annex II B DIR. 2006/42/EC) Manufacturer's name: DAV Tech Srl Address: Via G. Ravizza, 30, .36075, Montecchio Maggiore (VI) DECLARES THAT THE PARTLY COMPLETED MACHINERY Component: PCP/PDP/GP/GP2K/E2K/HEATERS EVO Controller Control system for pumps, extruders, heaters and...

  • Page 8: Glossary

    Touch screen that allows the user to interact with a graphical interface using fingers Touch Screen or special objects. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 9: Service And Manufacturer Contact Details

    (or the service center if present), specifying the component identification data. The customer can avail themselves of commercial technical support from area agents or importers, who are in direct contact with DAV Tech Srl. Company name DAV Tech Srl Postal address Via Ravizza, 30, 37065, Montecchio Maggiore (VI) –...

  • Page 10: Presentation And Operation

    Pen holder attachment HMI Display Support feet Figure 02 -- GP2K EVO Front COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...
  • Page 11 MOTOR connection (7/8 5-pole F) ENCODER connection (M12 5-pole M) Figure 05 -- GP EVO Controller Rear COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 12 DISPENSER A connection (Chogori M) DISPENSER B connection (Chogori M) Figure 07 -- PDP EVO Controller Rear COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 13 HARTING connector and one M8 5-pole connector at positions 05 and 07, based on customer requirements. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 14: Special Versions

    "B" (PDP and GP2K pumps). In both cases, "A" indicates the resin circuit, while "B" indicates the hardener circuit. These circuits must NEVER be exchanged. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 15 • Connect and disconnect cables with the control unit turned off COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 16 Electrical system connection Notes Figure 13 – PDP EVO Controller Connection Example COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...
  • Page 17 Figure 15 – Example of EVO HEATERS controller connection ATTENTION! For electrical connections, check the specific section of the component manual. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 18: Exploded View

    Storage Ambient Temperature °C -20 ÷ 55 Permissible non-condensing humidity 5 ÷ 90 COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...
  • Page 19 Component height (min ÷ max) Component depth (min ÷ max) Component weight COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...
  • Page 20 It is possible to request the component 3D model in the desired version from the manufacturer without any commitment. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 21: Safety

    The component is built in compliance with the technical safety standards in force at the time of its construction. 3.1 Component safety devices N.A. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 22: Required Free Spaces

    The green areas indicate zones that are clear of any obstacles. 3.3 Risk and residual risk zones N.A. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 23: Transport And Handling

    If the packaging is not intact, immediately contact the manufacturer, also sending photos of the packaging condition. Do not open it before notifying the manufacturer. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 24: Installation

    This chapter explains the connection method to be used for the component. The following types of connections are provided: • Electrical connection COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 25: Electrical

    220V power supply with a specially provided power adapter. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 26 For the EV command (PIN 4, YELLOW color) there must be a maximum of 10W absorption. It can be interfaced to an external system following the connection shown shortly. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 27 The clean contact indicated in the images is that of the customer's electrical panel, it is not the manufacturer's responsibility. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 28 Through this connector the component motor must be connected to the controller, so as to control its movement. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 29 This signal is available for both pumps, therefore both for pump "A" and pump "B". COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 30 This diagram is valid only for motors mounted on extrusion systems (E2K). COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 31 Start mixer (Button fuse A or B) Through this connector a mixer must be connected, so as to control it. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 32: Commissioning

    If even one of the points listed above is not compliant, commissioning must not proceed. Commissioning should only proceed when all points have been completed successfully. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 33: Software

    Access and modification of some parameters in the menu is allowed only with authorization from the manufacturer's technicians as they are protected by different credentials. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 34 Recipe BIT 4 BIT 3 BIT 2 BIT 1 BIT 0 COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 35: Controller Pcp Evo

    Product Pressure: Indicates the pressure of the fluid container 11) Indicative image of pump status (animated) COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 36: Settings Screen

    If you modify a parameter within the "Parameters" section, it is recommended to restart the controller to make the modification effective. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 37 7) Maximum product pressure: Maximum acceptable pressure generated at PCP pump output. Each pump has its maximum pressures, please consult the manual of the pump you purchased COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 38 12) Back: Button to return to the settings menu COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 39 3) Back: Button to return to the settings menu COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 40: Recipes Screen

    If you do not press this button, the set changes are lost. 10) Delete recipe: button that allows deleting the selected recipe COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 41: Interface Screen

    Product pressure: Indicates the pressure generated in real time at PCP output k) Last dispensing: Indicates the quantity of product that was dispensed in the last operation COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 42: Interface Screen (Modbus Registers)

    HOLDING REGISTER 11 Last dispensed quantity Commands Recipe Enable Dispensing Reset alarms COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 43: Controller Pdp Evo

    Hardener pressure: Indicates the pressure of the hardener fluid container 11) Indicative image of pump status (animated) COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 44: Settings Screen

    If you modify a parameter within the "Parameters" section, it is recommended to restart the controller to make the modification effective. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 45 7) Maximum resin/hardener pressure: Maximum acceptable pressure generated at PDP pump output. Each pump has its maximum pressures, please consult the manual of the pump you purchased COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 46 12) Back: Button to return to the settings menu COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 47 1) Back: Button to return to the settings menu COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 48: Recipes Screen

    12) Enable resin: selector to enable or disable resin dispensing using this recipe, useful in case of maintenance recipes COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 49: Interface Screen

    Resin/hardener pressure: Indicates the pressure generated in real time at PDP output k) Last dispensing: Indicates the quantity of product that was dispensed in the last operation COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 50: Interface Screen (Modbus Registers)

    HOLDING REGISTER 11 Last dispensed quantity Commands Recipe Enable Dispensing Reset alarms COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 51: Controller Gp Evo

    Product Pressure: Indicates the pressure of the fluid container 11) Indicative image of pump status (animated) COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 52: Settings Screen

    If you modify a parameter within the "Parameters" section, it is recommended to restart the controller to make the modification effective. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 53 7) Maximum product pressure: Maximum acceptable product pressure at GP pump output. Each pump has its maximum pressures, please consult the manual of the pump you purchased COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 54 12) Back: Button to return to the settings menu COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 55 5) Back: Button to return to the settings menu COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 56: Recipes Screen

    If you do not press this button, the set changes are lost. 8) Delete recipe: button that allows deleting the selected recipe COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 57: Interface Screen

    5) Back: Button to return to the settings menu (chapter 6.3.2) COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 58: Interface Screen (Modbus Registers)

    HOLDING REGISTER 10 HOLDING REGISTER 11 Commands Recipe Enable Dispensing Reset alarms COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 59: Controller Gp2K Evo

    Hardener pressure: Indicates the pressure of the hardener fluid container 11) Indicative image of pump status (animated) COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 60: Settings Screen

    If you modify a parameter within the "Parameters" section, it is recommended to restart the controller to make the modification effective. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 61 7) Pump valve delay: Parameter to indicate a possible delay between opening a possible solenoid valve and the start of the dispensing cycle. If no solenoid valve is present, leave at 0 COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 62 12) Back: Button to return to the settings menu COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 63 If the signal behaves opposite to what is desired, this selector must be inverted 8) Back: Button to return to the settings menu COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 64: Recipes Screen

    If you do not press this button, the set changes are lost. 10) Delete recipe: button that allows deleting the selected recipe COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 65: Interface Screen

    Resin/hardener pressure: Indicates the pressure generated in real time at GP output k) Last dispensing: Indicates the quantity of product that was dispensed in the last operation COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 66: Interface Screen (Modbus Registers)

    HOLDING REGISTER 11 Last dispensed quantity Commands Recipe Enable Dispensing Reset alarms COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 67: Controller E2K Evo

    Cartridge volume: Indicates the volume of product still present inside the cartridges 12) Indicative image of pump status (animated) COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 68: Settings Screen

    If you modify a parameter within the "Parameters" section, it is recommended to restart the controller to make the modification effective. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 69 6) Minimum alarm volume: Minimum volume that can be reached of fluid inside the cartridges before the system sends an alarm to the operator for end product COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 70 11) Back: Button to return to the settings menu COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
  • Page 71 3) Max homing speed: Maximum motor speed with which it returns the dispensing pistons to their initial position 4) Back: Button to return to the settings menu COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 72: Recipes Screen

    If you do not press this button, the set changes are lost. 10) Delete recipe: button that allows deleting the selected recipe COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 73: Interface Screen

    5) Back: Button to return to the settings menu (chapter 6.5.2) COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 74: Interface Screen (Modbus Registers)

    HOLDING REGISTER 11 Last dispensed quantity Commands Recipe Enable Dispensing Reset alarms COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 75: Procedure

    Use of suck-back function (PCP/PDP/E2K) • Use of agitators and heaters (HEATERS) COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 76: Controller On And Off

    COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 77: Quick Command" Mode (Pcp/Pdp/Gp/Gp2K/E2K)

    COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 78: Use Of Stirrers And Heated Zones (Heaters)

    (or disconnect the heated zone). COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 79: Maintenance

    ATTENTION! For controller cleaning use only soft brushes or cotton cloths. COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 80: System Messages

    • Reset the specific alarm COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 81: Mechanical Fault

    5 (based on purchased controller, go when commanded to relative chapter) COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 82: Alarms

    Output pressure at pump has exceeded maximum terminal part Pressure alarm threshold Reduce dispensing flow rate COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 83: Pdp Evo Controller Alarms

    Reduce dispensing flow rate threshold Verify that product has not cured inside mixer COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 84: Gp Evo Controller Alarms

    Verify that, if there are shutoff valves along threshold piping, they are open Reduce dispensing flow rate COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 85: Gp2K Evo Controller Alarms

    Verify that, if there are shutoff valves along piping, they are open COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

  • Page 86: E2K Evo Controller Alarms

    Product level alarm Minimum product quantity has been reached Replace cartridge COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 23/05/2025...

  • Page 87: End Of Life

    COD.: DTVI_EVO_2443 DAV TECH SRL REV.: 04 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.

This manual is also suitable for:

Evo gpEvo gp2kEvo pcpEvo pdpEvo riscaldatori

Table of Contents