VooPoo Drag S Box Kit 2500mAh 60W Instructions For Use

Instructions for Use
VOOPOO Drag S Box Kit 2500mAh 60W with Airflow System
TPD Version (No Nicotine, No E-Liquid) - Mashup Color
Package Contents:
1.
Drag S Mod (2500mAh built-in battery)
2.
PnP Pod Tank (2mL capacity)
3.
PnP VM1 Coil (0.3Ω, Pre-installed for DTL)
4.
PnP VM5 Coil (0.2Ω, for Sub-Ohm DTL)
5.
USB-C Charging Cable
6.
User Manual
Safety Guidelines:
Avoid exposing the device to water, high temperatures, or direct sunlight.

 Use only recommended e-liquids with appropriate VG/PG ratios (e.g., 70/30 VG/PG for sub-
ohm vaping).
 Do not leave the device unattended while charging.
Keep out of reach of children and pets.

Charge the device only with the provided USB-C cable and a compatible power source.

Getting Started:
Charge the Device:
Use the USB-C cable to fully charge the Drag S before first use.
o
The LED indicator and screen will display charging progress.
o
Prepare the Pod Tank:
o Remove the pod from the mod base.
o Flip the pod upside down and locate the silicone seal on the bottom.
Open the seal and fill the pod with your preferred nicotine-free e-liquid.
o
o Close the seal securely to prevent leaks.