VooPoo Drag S Mod 2500mAh 60W Instructions For Use

Instructions for Use
VOOPOO Drag S Box Kit 2500mAh 60W with Airflow System
TPD Version (No Nicotine, No E-Liquid) - Classic Design
Package Contents:
1.
Drag S Mod (2500mAh built-in battery)
2.
PnP Pod Tank (2mL capacity)
3.
PnP VM1 Coil (0.3Ω Pre-installed for DTL vaping)
4.
PnP VM5 Coil (0.2Ω for Sub-Ohm DTL vaping)
5.
USB-C Charging Cable
6.
User Manual
Safety Guidelines:
Use only recommended e-liquids with appropriate VG/PG ratios (e.g., 70/30 VG/PG for sub-

ohm vaping).
 Avoid exposure to water, extreme heat, or direct sunlight.
 Ensure the coil is fully saturated with e-liquid before first use to prevent burning.
Charge the device only with the provided USB-C cable and a compatible power source.

Keep out of reach of children and pets.

Getting Started:
Charge the Device:
Connect the Drag S to a power source using the provided USB-C cable.
o
The screen will display charging progress. Fully charge the device before first use.
o
Prepare the Pod:
o Remove the pod from the mod.
o Insert the desired coil:

Push the coil firmly into the base of the pod. Ensure it fits snugly.