H3C S6850 Series Hardware Information
Immersion-cooled switch
Hide thumbs
Also See for S6850 Series:
- Configuration manual (394 pages) ,
- Installation manual (82 pages) ,
- Manual (54 pages)
Subscribe to Our Youtube Channel
Related Manuals for H3C S6850 Series
Summary of Contents for H3C S6850 Series
- Page 1 H3C S6850-56HF-IM Immersion-Cooled Switch Hardware Information and Specifications New H3C Technologies Co., Ltd. http://www.h3c.com Document version: 5W100-20240429...
- Page 2 The information in this document is subject to change without notice. All contents in this document, including statements, information, and recommendations, are believed to be accurate, but they are presented without warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions contained herein.
- Page 3 Preface H3C S6850-56HF-IM Immersion-Cooled Switch Hardware Information and Specifications describes the technical specifications and chassis views for the S6850-56HF-IM switch. This preface includes the following topics about the documentation: • Audience. • Conventions. • Documentation feedback. Audience This documentation is intended for: •...
- Page 4 Symbols Convention Description An alert that calls attention to important information that if not understood or followed WARNING! can result in personal injury. An alert that calls attention to important information that if not understood or followed CAUTION: can result in data loss, data corruption, or damage to hardware or software. An alert that calls attention to essential information.
- Page 5 Documentation feedback You can e-mail your comments about product documentation to info@h3c.com. We appreciate your comments.
- Page 6 Contents Product models and system features ····························································· 1 Product models ·················································································································································· 1 System features ················································································································································· 1 Chassis views ································································································ 1 S6850-56HF-IM switch······································································································································· 1 FRUs and compatibility matrixes···································································· 2 Removable power modules ··········································································· 2 180 W AC power module (LSVM1AC800) ········································································································· 3 Ports ··············································································································...
- Page 7 Product models The H3C S6850-56HF-IM immersion-cooled switch is a high-density intelligent 25G access switch developed by H3C for cloud data centers and cloud computing networks. It provides robust hardware forwarding capabilities and a wide range of data center features. The S6850 series include the following models:...
- Page 8 Item S6850-56HF-IM Management Ethernet ports 100M/1000M Base-T copper port: 1 USB port SFP28 ports QSFP28 ports IRF physical ports QSFP28 ports on the device panel Number of power module slots Power module slots Power module specifications Power input type AC input, 240 V high-voltage DC input Power module specifications "180 W AC power module (LSVM1AC800)"...
- Page 9 Item S6850-56HF-IM NOTE: The allowed maximum temperature decreases by 0.33°C (32.59°F) as the altitude increases by 100 m (328.08 ft) from 0 m (0 ft). Storage temperature –40ºC to +70ºC (–40°F to +158°F) Relative humidity 5% to 95% (non-condensing) Certification •...
- Page 10 Chassis views S6850-56HF-IM switch Figure 1 S6850-56HF-IM front panel (1) Mounting bracket (2) Tank-mount adapter (3) USB port (4) Management Ethernet copper port (5) Serial console port (6) SFP28 Ethernet fiber port (7) SFP28 port status LED (8) QSFP28 port status LED (9) QSFP28 Ethernet fiber port (10) Serial label pull tab (11) Power module status LED...
- Page 11 The S6850-56HF-IM immersion-cooled switch provides two power module slots on the front panel, and comes with the one LSVM1AC800 AC power module installed in each slot. FRUs and compatibility matrixes The S6850-56HF-IM immersion-cooled Ethernet switch features a modular design. See Table 2 details.
- Page 12 180 W AC power module (LSVM1AC800) Appearance Figure 4 LSVM1AC650 power module (1) Handle (2) Power module status LED (3) Power input receptacle (4) Power module latch For more information about LED description, see "Power module status LED." Functions The LSVM1AC800 is an AC input and DC output power module. It provides a maximum output of 800 W.
- Page 13 • As a best practice, use H3C liquid-cooling modules and cables on the switch. • The H3C liquid-cooling modules and cables are subject to change over time. For the most recent list of H3C liquid-cooling modules and cables, contact your H3C Support or marketing staff.
- Page 14 IMPORTANT: • Due to compatibility and driver differences among USB devices of different manufacturers, H3C does not guarantee that USB devices from all manufacturers will function normally on this series of switches. If a USB device is not functioning properly, it is not due to a switch fault. Try using a USB device from a different manufacturer.
- Page 15 Item Description Fiber port properties Depends on the transceiver modules installed Operating mode Full Duplex Available transceiver 100G QSFP28 liquid-cooling module as shown in Table 8 modules and cables Table 8 QSFP28 SFP liquid-cooling modules Transc Mode trans eiver Transceiver Cable Central bandwidt...
- Page 16 LEDs System status LED Through the system status LED, you can preliminarily determine the working state of the switch. For more information, see Table Table 11 Description of the system status LED Status Description Steady green The switch has been normally started Flashing green The switch is performing power-on self test (POST).
- Page 17 Management Ethernet port status LED Table 14 Management Ethernet port LED description Status Description The management Ethernet fiber port does not have a connection. Steady green The management Ethernet fiber port is operating at 1000 Mbps. LINK/ACT Flashing green The management Ethernet fiber port is in sending or receiving data. Steady yellow The management Ethernet fiber port is operating at 100 Mbps.
- Page 18 The S6850-56HF-IM immersion-cooled switch adopts single-phase immersion liquid cooling technology. The switch is fully immersed in the water for the flow of the liquid to remove the heat. For more information about the liquid cooling system, see H3C Immersion Cooling System User Guide.
Need help?
Do you have a question about the S6850 Series and is the answer not in the manual?
Questions and answers