Page 1
NEN186 series Canister vacuum cleaner, household type Owner’s Guide Thank you for purchasing your new Eureka vacuum! Important instructions For easy assembly, please take a few moments to read this owner’s guide. If you have questions about your new vacuum, please contact our customer service We’re here to help!
“Register Your Product” link in the top right corner. Inspection: Carefully unpack and inspect your new Eureka vacuum cleaner for shipping damage.Each unit is tested and thoroughly inspected before shipping. For instructions regarding any shipping damage, call Eureka Customer Service HELPLINE 1-800-282-2886 immediately.
Store your cleaner indoors in a cool, dry area. dropped, damaged, left outdoors, or Keep your work area well lit. dropped into water, call the Eureka Unplug electrical appliances before Customer Service HELPLINE at vacuuming them.
3. Attach the motorized floor nozzle to the end of the telescoping metal wand until you hear an audible click. Click! 4. When using accessories, remove motorized floor nozzle and telescopicing metal wand, attach the desired accessory to the handle by inserting it. www.eureka.com...
The symbols shown below correspond to the type of floor the setting is for. Position 1: switch move to “Carpet” icon, brushroll run with high speed Position 2: switch move to “Hard Floor” icon, brushroll run with low speed Eureka Customer Service HELPLINE 1-800-282-2886...
• Insert tools directly into the end of the telescoping metal wand as shown (Fig. 2) Accessory collection • When finished using accessories, remove them from handle or the telescoping metal wand.You can put them on the accessory holder as shown(fig.3) www.eureka.com...
filter and press button up to pull lid o . 3. Turn dust cup upside down to 4. After dust cup is emptied, place lid empty into trash bin. back on top of dust cup until an audible click is heard. Eureka Customer Service HELPLINE 1-800-282-2886...
Page 9
filter. 5. Rinse both the HEPA filter and 6. Allow the filters to air dry for the pre-motor filter in lukewarm water. 24 hours before placing them back. www.eureka.com...
filters. lf these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum again. 2) After the 30 minute period, press the power button. lf the vacuum still does not work, call the Eureka Customer Service HELPLINE at 1-800-282-2886. Problem Manifestation...
Page 12
Eureka authorized resellers. What Eureka will do: Shipping charges: Eureka will, at its option, repair or replace a You will be responsible for any initial shipping defective vacuum or vacuum part that is covered and insurance charges if the defective product(s) by this warranty.
Need help?
Do you have a question about the NEN186 Series and is the answer not in the manual?
Questions and answers