Setting The Scanning Order; Turning Scanning On And Off - CYBEX AUTOVIEW COMMANDER Installer/User Manual

AutoView Commander Installer/User Guide
Setting the
Scanning Order
Turning Scanning
On and Off
1. From the main OSD Window, press the Control key twice or type
Alt-M to access the Command Menu.
2. Choose 'Scanning order' from the menu.
3. Select either 'Sequential order' or 'Alphanumeric order'.
4. Press Enter.
From the OSD menu.
1. From the main OSD Window, press the Control key twice or type
Alt-M to access the Command Menu.
2. Select 'Turn scanning ON' or 'Turn scanning OFF' from the menu.
This is a toggle option - only one scanning option will show on the
menu at any one time.
3. Press Enter.
With the Scan Button (non-secure mode only)
1. You may initiate scanning by pressing and holding the Step/
Scan push-button until the SCAN LED illuminates.
2. Scanning may be halted if a channel is selected or if the Step/
Scan push-button is pressed again.
24