CYBEX AUTOVIEW COMMANDER Installer/User Manual page 21

3. When prompted for another cascade level, type Y and press Enter.
4. Enter the letter that corresponds to the computer port on the cascaded
AutoView you are adding and press Enter.
5. When you have finished adding levels (up to two total), type N when
prompted for another cascade level and press Enter.
Press Esc at any point to exit this operation without adding the channel.
Deleting an Existing Channel
1. Highlight the channel you wish to delete in the main OSD Window.
2. Press the Control key twice or type Alt-M to access the Command Menu.
3. Select 'Channel maintenance' from the Command Menu.
4. Choose the 'Delete channel' option.
5. Type Y or N at the prompt to confirm the deletion and press Enter.
Changing Channel Names and Addresses
1. Highlight the channel you wish to change in the main OSD Window.
2. Press the Control key twice or type Alt-M to access the Command Menu.
3. Select 'Channel maintenance' from the Command Menu.
4. Choose the appropriate option.
5. Enter the new channel name or address and press Enter to accept.
Press Esc at any point to exit this operation without saving the changes.
17
On-Screen Display Operations