CYBEX AUTOVIEW COMMANDER Installer/User Manual page 25

Push-Button and Hot-Key Channel Selection
While in secure mode, all front panel push-buttons and hot-key channel
selection methods are disabled. (This also includes use of the Cybex
Remote Switch Panel (RSP)) All other hot-key commands remain
operational to the administrator only. In non-secure mode, all push-
buttons and hot-key commands function normally.
Creating the Administrator Password
1. Press the Control key twice or type Alt-M to access the Command Menu.
2. Select 'Administrator Functions' from the Command Menu.
3. Select 'Administrator Password' from the Administrator Menu.
4. Type your password and press Enter. (The password is not case
sensitive.)
5. Repeat entry of the password for confirmation.
CAUTION: Security is enabled once the password has been
created. Store a copy of your password in a safe place.
You should now see the option 'F10 - Logout' at the bottom of your main
OSD Window and a lock symbol to the right of the menu headings.
Setting the Administrator Logout Time
1. Press the Control key twice or type Alt-M to access the Command Menu.
2. Select 'Administrator Functions' from the Command Menu.
3. Select 'Administrator Logout Time' from the Administrator Menu.
4. Enter the number of minutes you wish to pass without keyboard/
mouse activity before the administrator is automatically logged out of
the system. The default of 0 keeps the administrator logged on
continuously; 60 is the maximum setting.
21
On-Screen Display Operations