Page 2
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
Advanced I/O Modules (AIOM) are the latest form factor designed to provide a ® wide range of networking options as well as other I/O technologies. The AOC-A25G-m2SM/ AOC-A25G-m2SG is one of the most feature-rich and low-power consumption 25 GbE controllers in the market. Based on the Mellanox ConnectX-6 Lx controller with the most ®...
Frequently Asked Questions: https://www.supermicro.com/FAQ/index.php • If you have any feedback on Supermicro product manuals, contact our writing team at: Techwriterteam@supermicro.com This manual may be periodically updated without notice. Check the Supermicro website for possible updates to the manual revision level.
Congratulations on purchasing your add-on card from an acknowledged leader in the industry. Supermicro products are designed with the utmost attention to detail to provide you with the highest standards of quality and performance. For product support and updates, refer to our website at https://www.supermicro.com/en/products/networking/adapters.
Super AOC-A25G-m2SM/AOC-A25G-m2SG User's Manual • Controller interface • PLDM for Monitor and Control DSP0248 • PLDM for Firmware Update DSP026 Remote Boot • Remote boot over Ethernet • Remote boot over iSCSI • UEFI support for x86 and ARM servers •...
Storage humidity: 90% non-condensing relative humidity at 35°C (95°F) Physical Dimensions • Card PCB dimensions: 2.99" x 4.528" (76 mm x 115 mm) (W x D) 1.4 Available SKUs Note: This product is sold only as part of an integrated solution with Supermicro server systems. SKUs Bracket Description...
Super AOC-A25G-m2SM/AOC-A25G-m2SG User's Manual 2.2 Major Components The following major components are installed on AOC-A25G-m2SM/-m2SG: AOC-A25G-m2SM-/m2SG Major Components Component Name Definition Mellanox ConnectX-6 Ethernet 25 GbE controller JPAUX1 1–2: Enable AUX Power in S5 2–3: Disable AUX Power in S5...
There are a total of two SFP28 LAN ports (SFP28 LAN1/SFP28 LAN2) on the AOC-A25G- m2SM/-m2SG. These two LAN ports support network speeds of up to 25 GbE. 1. LAN Port 1 2. LAN Port 2 AOC-A25G-m2SM DESIGNED IN USA REV:1.01...
Page 16
Super AOC-A25G-m2SM/AOC-A25G-m2SG User's Manual SFP112 LEDs On this card, each SFP28 25 GbE LAN connector has two LEDs. This card's 25 GbE LAN has two bi-colored LED indicators per port (Link and Activity) at the bottom of the PCB. The LED on the left indicates link speeds, and the LED on the right indicates the status of the connector activity.
No standby power to AOC standby power. Enable Enable jumper to Standby Power can be connect standby enabled to provide support for Standby power to AOC NIC power to AOC NIC. NC-SI (IPMI/Failover Support). Consult Supermicro before enabling it.
Chapter 3 Installation Your system came with the AOC-A25G-m2SM/-m2SG add-on card, which is designed as a part of an integrated solution. We do not recommend that any part of your system components be removed and reinstalled. However, if you do need to remove or reinstall a system component, including this add-on card, follow the instructions to ensure proper system setup.
Chapter 3: Installation 3.2 Before Installation To install the add-on card properly, be sure to follow the instructions: 1. Power down the system. 2. Remove the power cord from the wall socket. 3. Use industry-standard antistatic equipment (such as gloves or a wrist strap) and follow the instructions listed on page 18 to avoid damage caused by ESD.
Super AOC-A25G-m2SM/AOC-A25G-m2SG User's Manual 3.3 Uninstalling and Installing the Add-on Card (With 0.5U Brackets) Follow the steps to install an add-on card into your system. If the system is fixed onto a rack, the removal of the server top cover is not required. If the system is not anchored to a fixed structure, it is recommended to remove the system's top cover for ease of installation.
Page 21
Chapter 3: Installation B. Installing an AIOM Module To install an AIOM card, take the following steps: 1. Position the AIOM module in front of the empty slot. 2. Gently push it onto the metal bracket. The AIOM module should slide into the chassis until the card is securely seated in the connector.
Page 22
Super AOC-A25G-m2SM/AOC-A25G-m2SG User's Manual C. Installing an AIOM Module (With an AIOM Slot Cover) To install an AIOM card with an AIOM slot cover, take the following steps: 1. Remove the AIOM slot cover by removing the knob and screw that is attached to the bracket of the chassis.
Intel Download Center or the Supermicro site at https://www.supermicro.com/ wftp/Networking_Drivers. 1. Run CDR-NIC. 2. When the SUPERMICRO window appears, click on the computer icon next to the product model. Figure 3-4: Add-On Card Drives and Tools 3. Click on INSTALL DRIVERS AND SOFTWARE.
Super AOC-A25G-m2SM/AOC-A25G-m2SG User's Manual 3.5 Installing the Drivers (for Mellanox ConnectX-6) Use the appropriate following procedures to install the driver for the AOC-A25G-m2SM/-m2SG add-on card on both Linux and Windows. Linux Drivers Use the following procedures to install the 25 GbE driver on the Linux (RedHat/CentOS) operating system: 1.
Page 25
(Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage.
Need help?
Do you have a question about the AOC-A25G-m2SM and is the answer not in the manual?
Questions and answers