Subscribe to Our Youtube Channel
Related Manuals for Blueair 411i Max
Summary of Contents for Blueair 411i Max
- Page 1 User manual Scan here to access additional product, registration, warranty information and FAQs. Blue Pure 411i Max...
-
Page 2: Safety Information
Always disconnect the appliance from the power supply before maintenance. If your Blueair appliance is found to be defective, we will replace it with the same or a similar model at no cost, per the warranty terms. Please use caution attempting repairs yourself, as this presents the danger of electrical shock or injury. - Page 3 When disconnecting the unit from the power supply, do not pull on the power cord, pull on the power plug. Use the power cable provided with your Blueair air purifier to plug directly and firmly into an appropriate, electrical outlet.
-
Page 4: Regulatory Information
Regulatory information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 5: Product Map
Product map User interface Fan motor Washable fabric pre-filter Air outlet Noise shield Air quality indicator (AQI) Particle & carbon filter Air quality status (PM 2.5) The air purifier has a particle sensor to measure the fine particles (PM2.5) level. The LED indicator displays air quality status in 5 colors from excellent (blue) to very polluted (red). -
Page 6: Getting Started
Fan speed levels which the fan speed based on fully dimmed lights. you can manually set by your PM2.5 indoor level pressing the Fan Speed to ensure optimal air button on the interface quality. or adjust via Blueair app. Recommended setting. - Page 7 How to use tips Change brightness Step 1 Enable/disable Child lock Press the Fan Speed button and On/ Long press On/Standby button for Standby button at the same time. about 5 seconds (until all the LEDs Hold for three seconds. of the interface light up and blink once).
- Page 8 Connect to the Blueair app Connecting to the Blueair app allows you to control the air purifier remotely and monitor filter usage. The app offers additional functions to the air purifier. Step 1 Step 2 Step 3 Download the Blueair app from Open the app.
-
Page 9: Maintenance Information
Maintenance information Important! Turn the air purifier off and disconnect the air purifier from the power supply before maintenance. Changing your filter When your air purifier’s indicator light turns red, it’s time to change the main filter. This will occur some time between 6 and 9 months of operation, depending on usage and your air quality conditions. - Page 10 Cleaning your washable pre-filter Clean your pre-filter regularly when you see dust or dirt. Vacuum the exterior of the fabric with a soft brush attachment. If the pre-filter requires a deeper clean, wash according to the instructions on the pre-filter´s label. Hang to dry.
-
Page 11: Troubleshooting
3. Reconnect the power cable. 4. Press the power button If the air quality does not improve with the use of the air purif ier and with ventilation, please contact us. For more information and troubleshooting tips, please check the Support page on www.blueair.com... - Page 12 Blueair Inc. 125 S Clark, Suite 2000, Chicago, IL, 60603 USA Tel: +1 888 258 3247 info@blueair.com...
Need help?
Do you have a question about the 411i Max and is the answer not in the manual?
Questions and answers