Related Manuals for BODYKORE CF2101
Summary of Contents for BODYKORE CF2101
- Page 1 Flat Bench Owner’s Manual CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Keep this manual for future reference.
-
Page 2: Table Of Contents
Table of Contents Table of Contents Important Safety Guidelines for Owners ................01 Assembly Instructions ......................02 Assembly Guide ........................03 Daily Inspection ........................04 Weekly Inspection ........................ 05 Monthly Inspection ....................... 06 Warranty ....................... 07... -
Page 3: Important Safety Guidelines For Owners
CF2101 Assembly Guide Important Safety Guidelines for Owners Follow these guidelines to maintain proper working condition of the equipment: Important: Do not modify the equipment or any of its parts, or permanently remove any part from the equipment. Do not use accessory attachments that are not recommended by ours as such attachments might cause injuries. -
Page 4: Assembly Instructions
CF2101 Assembly Guide Assembly Instructions Assembly of the CF2101 takes about 60 minutes to complete. If this is the first time you have assembled this type of equipment, plan on allowing more time. Be careful to open boxes and assemble components in the sequence presented in this manual. -
Page 5: Assembly Guide
Assembly Guide Assembly Guide Step 1 Position the Back Pad and Seat Pad on the Main Frame frame and secure it . -
Page 6: Daily Inspection
Daily Inspection Daily Inspection You will need to do the following tasks each day to maintain the equipment and keep it operating smoothly and safely. Each of these tasks is covered in this section. You should perform those tasks that are appropriate for the equipment you are maintaining, and skip those tasks that do not apply. -
Page 7: Weekly Inspection
Weekly Inspection Weekly Inspection This section covers the tasks you should do each week to maintain the equipment. Choose the appropriate tasks for your equipment, depending on what you are maintaining: • Condition and deep clean upholstery. • Clean and lubricate cable rod ends. •... -
Page 8: Monthly Inspection
Monthly Inspection Monthly Inspection Each month, the following tasks should be performed to maintain the equipment. Choose the appropriate tasks based on what you aremaintaining. • Inspect frames and movement arms. • Lubricate pop pins. • Check and lubricate ratcheting seat lever •...
Need help?
Do you have a question about the CF2101 and is the answer not in the manual?
Questions and answers