Page 1
Dynamic Trainer Owner’s Manual C A U T I O N Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference.
Assembly Guide Important Safety Guidelines for Owners Follow these guidelines to maintain proper working condition of the equipment: Important: Do not modify the equipment or any of its parts, or permanently remove any part from the equipment.Do not use accessory attachments that are not recommended by ours as such attachments might cause injuries.
Assembly Guide Assembly Instructions It takes about minutes to assemble this equipment. If this is your first time doing this,allowing more time. Be careful to open boxes and assemble components in the sequence presented in this manual. Note: With so many assembled parts, proper alignment and adjustment is critical. While tightening the fasteners, be sure to leave room for adjustments.
Assembly Guide Daily Inspection You will need to do the following tasks each day to maintain the equipment and keep it operating smoothly and safely. Each of these tasks is covered in this section. You should perform those tasks that are appropriate for the equipment you are maintaining, and skip those tasks that do not apply.
Assembly Guide Week Inspection This section covers the tasks you should do each week to maintain the equipment. Choose the appropriate tasks for your equipment, depending on what you are maintaining: • Condition and deep clean upholstery. • Clean and lubricate cable rod ends. •...
Assembly Guide Mouthly Inspection Each month, the following tasks should be performed to maintain the equipment. Choose the appropriate tasks based on what you aremaintaining. • Inspect frames and movement arms. • Lubricate pop pins. • Check and lubricate ratcheting seat lever •...
Need help?
Do you have a question about the MX1161EX and is the answer not in the manual?
Questions and answers