Playing Back Pictures with a TV Screen
■
Playing back pictures using the AV
cable (supplied)
•
Set the [ TV ASPECT].
•
Turn the camera and the TV off.
AV OUT
DIGITAL
B
1
Connect the AV cable A
(supplied) to the [ AV OUT] socket
of the camera.
•
Connect the AV cable with the [c]
mark facing the [q] mark on the [AV
OUT] socket.
•
Hold B and then insert or pull the AV
cable straight.
2
Connect the AV cable to the
video input and the audio input
sockets on the TV.
1 Yellow: to the video input socket
2 White: to the audio input socket
3
Turn the TV on and select
external input.
4
Turn the camera on and playback
the picture.
Connecting to other equipment
( P23 )
1
2
A
•
Do not use any other AV cables except
the supplied one.
•
The top and bottom or left and right of
the picture may be cut off slightly when
it is displayed due to the characteristics
of the TV.
•
Read the TV operating instructions too.
•
Pictures might be slightly blurred if you
show them vertically on a television.
•
Set the volume of this unit to 0 when
outputting
audio.( P21 )
•
You can view pictures on TVs in other
countries (regions) which use the NTSC
or PAL system when you set [VIDEO
OUT] in the [SETUP] menu. Even if you
set [VIDEO OUT] to [PAL], the output
signal will still be NTSC in the recording
mode.
■
Playback pictures on TV with SD
Memory Card slot
You can put your SD Memory Card in a
television with an SD Memory Card slot to
show still images.
•
Depending on the television, some
pictures may not take up the whole
screen.
•
You cannot play motion pictures. To
play back motion pictures, connect the
camera to the TV with the AV cable
(supplied).
•
You can use SDHC Memory Card only
on SDHC Memory Card compatible TV.
•
You may be unable to play MultiMedia
Cards.
107
VQT1L86