Playing Back Pictures With A Tv Screen - Panasonic Lumix DMC-LC1 Operating Instructions Manual

Playing Back Pictures with a TV Screen

ª Playing back pictures with AV cable (supplied)
• Turn the camera and the TV off.
2
1
1
Connect the AV cable to the
[AV OUT/REMOTE] socket of the
camera.
2
Connect the AV cable to the video
input and the audio input sockets
of the TV.
• Yellow: to the video input socket
• White: to the audio input socket
3
Turn the TV on and select external
input.
4
Turn the camera on and then set
to playback mode [
Playback (advanced)
USB
AV OUT/
REMOTE
DC IN
].
ª Viewing pictures in other
countries
When setting [VIDEO OUT] on the
menu (P26), you can view pictures on a
TV in other countries (regions) which
use the NTSC or PAL system.
• Even if you set menu selection for
[VIDEO OUT] to [PAL], the output
signal is still NTSC in the recording
mode.
ª Playback pictures on TV with SD
Memory Card slot
An SD Memory Card can be played
back on TVs with an SD Memory Card
slot.
If you play back pictures recorded using
[HDTV] mode on a High-Definition TV,
(HDTV has 16:9 aspect) the picture
quality will be higher.
¬ Suggestions/Tips ¬
• When connecting to a TV, we
recommend using the AC adaptor as
the power source.
• Use the supplied AV cable only.
• The image is displayed on the TV only
in playback mode.
• Read the TV operating instructions
too.
• When you set the video output to
[PAL], if connecting/disconnecting the
AV cable in playback mode, the
following occur.
–The screen becomes dark for a
moment.
–During playing back of motion
images, images and sounds are
interrupted.
95