Panasonic Lumix DMC-FZ28 Operating Instructions Manual page 47

Panasonic lumix dmc-fz28: user guide
Table of Contents

Advertisement

Press 1 [‰].
Press 3/4 to select a mode.
You can also press 1 [‰] to select.
For information about flash settings that can be selected, refer to
"
Available flash settings by recording mode
Press [MENU/SET].
You can also press the shutter button halfway to finish.
The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically set.
Item
‡: AUTO
:
AUTO/Red-eye
¢
reduction
‰: Forced flash ON
:
Forced ON/Red-eye
¢
reduction
:
Slow sync./Red-eye
¢
reduction
Œ: Forced flash OFF
¢ The flash is activated twice. The subject should not move until the second flash is
activated.
Flash interval depends on the brightness of the subject.
∫ About the digital red-eye correction
When the flash is used with the Red-eye reduction ([
automatically detect and correct the red-eye in the image data.
¢ It may not be able to correct the red-eye depending on the recording conditions. It may also
correct objects other than red-eye.
The flash is automatically activated when the recording conditions make
it necessary.
The flash is automatically activated when the recording conditions make
it necessary.
It is activated once before the actual recording to reduce the red-eye
phenomenon (eyes of the subject appearing red in the picture) and then
activated again for the actual recording.
Use this when you take pictures of people in low lighting
conditions.
The flash is activated every time regardless of the recording conditions.
Use this when your subject is back-lit or under fluorescent light.
The flash setting is set to [
[CANDLE LIGHT] in scene mode.
If you take a picture with a dark background landscape, this feature will
slow the shutter speed when the flash is activated so that the dark
background landscape will become bright. Simultaneously it reduces the
red-eye phenomenon.
Use this when you take pictures of people in front of a dark
background.
The flash is not activated in any recording conditions.
Use this when you take pictures in places where the use of the
flash is not permitted.
"
.
(P48)
Description of settings
] only when you set [PARTY] or
(P66)
], [
Advanced (Recording pictures)
], [
]) selected, it will
VQT1S36
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents