Troubleshooting - Panasonic Lumix DMC-FZ28 Operating Instructions Manual

Others
[AUDIO DUB.]
∫ Functions that cannot be used when the component cable is connected
[LCD MODE]/[HISTOGRAM]/[TITLE EDIT]/[TEXT STAMP]/[RESIZE]/[TRIMMING]/
[LEVELING][ASPECT CONV.]/[AUDIO DUB.]/[COPY]/[MULTI] settings of [DPOF PRINT]/
[MULTI] settings of [PROTECT]/[DELETE MULTI]/Creation of still pictures from motion pictures

Troubleshooting

First, try out the following procedures (P134–141).
If the problem is not resolved, it may be improved by selecting [RESET]
[SETUP] menu when taking pictures.
The camera cannot be operated even when it is turned on.
•
The battery is not inserted correctly.
•
The battery is exhausted.
•
Charge the battery.
The LCD monitor turns off while the camera is turned on.
•
Is the display set to Viewfinder?
> Press [EVF/LCD] to switch to the LCD monitor.
• Is [AUTO LCD OFF]
> Press the shutter button halfway to cancel these modes.
•
The battery is exhausted.
•
Charge the battery.
The camera turns off immediately after it is turned on.
•
The battery is exhausted.
•
Charge the battery.
•
If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [ECONOMY] mode etc.
The [CHARGE] lamp flashes.
•
Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to
charge the battery or charging may remain incomplete.
•
Are the terminals of the charger or battery dirty?
> Wipe off the dirt using a dry cloth.
134
VQT1S36
•
(P110) Motion pictures
•
[FLIP ANIM.]
•
Protected pictures
•
When set to [RAW] or [RAWiJPEG]
Battery and power source
(P26) of the [ECONOMY] mode active?
(P17)
(P27) on the
(P26)