Panasonic Lumix DMC-FZ28 Operating Instructions Manual page 113

•
When the camera has been connected to the PC with [USB MODE] set to
[PictBridge(PTP)], a message may appear on the PC's screen. Select [Cancel] to close
the screen, and disconnect the camera from the PC. Then set [USB MODE] to [PC]
again.
Double-click on [Removable Disk] in [My Computer].
•
When using a Macintosh, the drive is displayed on the desktop. ("LUMIX", "NO_NAME"
or "Untitled" is displayed.)
Double-click [DCIM] folder.
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pictures to any different folder on
the PC.
∫ Disconnecting the USB connection cable safely
•
Proceed with the hardware removal using "Safely Remove Hardware" on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of
the digital camera before removing the hardware.
Note
•
Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC7PP; optional).
•
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
•
With the Mac OS X v10.2 or an earlier operating system, set the Write-Protect switch of the
SDHC memory card to the [LOCK] position when importing pictures from an SDHC memory
card.
∫ Viewing the contents of the built-in memory or card using the PC (folder
composition)
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET]
•
When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
•
When there is a picture with file number 999 inside the folder
1
2
3
MISC:
PRIVATE1:
(P27) in the [SETUP] menu has been executed
Folder number
File number
JPG: Pictures
MOV: Motion pictures
RW2: Pictures in RAW files
DPOF print
Favorite
Pictures recorded in flip
animation function
Connecting to other equipment
VQT1S36
113