Caroma MOD066 Installation Instructions Manual

BILL OF MATERIALS
Item 1
Item 2
1pc x MOD006-F
Frame
Item 4 Item 5
2pcs x M10 Thin Hex Nut 24pcs x 8G x 20mm Galvanised Button
Head Self tap Drilling Metal Screw
Item 7 Item 8
9pcs x M4x16 Pan Head Screws
2pcs x Round end protection
with Split Lock Washer
cap for M10 screw
Item 10 Item 11
4pcs x Internal tooth lock
washer for M4
Item 13
4pcs x M6x16 pan head php screw
Installation instructions-MOD066, issue 1
Item 3
2pcs x M10x106 mm sq neck
carriage bolt
4pcs x 37-206-049
Grommet Caroma Round 45mm
Item 6
2pcs x M10 Flat Washer
Item 9
2pcs x Saddle Clip for
DWV pipe 40mm
Item 12
4pcs x M4x5mm pan head
1pc x 37-206-606 tapware mounting
php dr screw
bracket
INSTALLATION INSTRUCTIONS
MOD066 - MODULAR FRAME FOR WIDE WALL BASIN
AND WALL CAROMA SMART COMMAND TAP KIT
WARNING!
WEAR SAFETY GLOVES & SAFETY SHOES AT ALL TIMES DURING ASSEMBLY &
INSTALLATION
IMPORTANT
WHEN TIGHTENING STAINLESS STEEL SCREWS, APPLY A LUBRICANT TO THE
THREADED AREA TO MINIMISE SEIZING.
NOTE
ALL MEASUREMENTS SHOWN ARE IN MILLIMETERS UNLESS OTHERWISE SPECIFIED.
Modular frame supports below wall stud configurations:
Fig.1 Fig.2
Closed
side
Both studs are facing the same 'Open side' of the studs are facing
direction each other
Modular frame support below wall stud cross-sections:
Fig.4
wall stud overall width
wall stud opening
Supported Wall Studs:
Table 1
Wall Stud Brand
RONDO RON251, RON495, RON681
SINIAT WSL92-055-xy, WSL92-075-xy, WSL92-115-xy
Fig.3
Open
side
'Closed side' of the studs are facing
each other
92
max 82
Part Number
1 of 8