Download Print this page

BONKOTE SS-1005A-B User Manual

Ceramic soldering iron system

Advertisement

Quick Links

Thank you for purchasing SS series soldering irons. Please read this guide before use, and keep it after read.
CAUTION
 Do NOT touch the soldering irons with wet hands in order to prevent electrical hazards including fatal shocks. .
 Do NOT touch the tip and the heater at any time while the power is on. Keep it away from
flammable materials.
 Do NOT take apart or modify SS series soldering irons except for replacement or maintenance.
 Tighten all bolts and screws securely before operation.
 Unplug the iron unit and allow sufficient time for it to cool when replacement or maintenance.
 Use genuine parts for replacement. Failure to do so may cause the iron units to malfunction.
 Do NOT use the iron units for anything other than normal soldering work.
HOW TO USE
 Set the temperature of iron tip by the temperature control dial on the grip. Do not over-twist the dial knob.
Blue
100~200℃
 Before use, check the iron tips temperature with a thermometer whether it is equal to the desired temperature.
 The indicator lamp built in the grip is lighting until the temperature reaches the point you set, then it change to blinking.
 When the temperature drops, the lamp will change from blinking to lighting, then starts blinking again.
 Make sure to unplug when finish the operation.
SPECIFICATIONS
Model No.
consumption
SS-1005A-2PNN
SS-1005B-2PNN
SS-5000FP-2PNN
SS-1005A-2EPV
SS-1005B-2EPV
SS-1005A-3PCHI
SS-1005B-3PCHI
SS-5000FP-3PCHI
SS-1005A-3EPV
SS-1005B-3EPV
Model No.
consumption
SS-1005A-2PNN
SS-1005A-3PCHI
SS-1005A-2EPV
SS-1005A-3EPV
SS-1005B-2PNN
SS-1005B-3PCHI
SS-1005B-2EPV
SS-1005B-3EPV
SS-5000FP-2PNN
SS-5000FP-3PCHI
CERAMIC SOLDERING IRON SYSTEM
SS-1005A・B / SS-5000FP User's Guide
Yellow
Red
200~360℃
360~490℃
Power
Input
Insulation
voltage
resistance
40W
100V
65W
20MΩ ≦
40W
220V
40W
100V
65W
40W
220V
Power
Heater element
CES-100-40
CES-220-40
40W
CES-100-40
CES-220-40
65W
CES-100-65
Earth line
Leak voltage
resistance
≦ 2.0mV
≦ 2.0Ω
(default)
(default)
Standard iron tip
Heater cover
SG7-2C
HCL-7
SG10-8BC
HC-10
SGP10-8BC
×
Control
Weight
Method
73 g
85 g
73 g
0 volt
85 g
Switch
Approx.
73 g
ON/OFF
250 mm
control
87 g
73 g
87 g
Cover nut
Heater collar
Radiator nut
CN-7
SUC-10
NA-11F
CN-10
SUCP-10
NA-20F
×
Total
Temp. range
length
100~490℃
Earth spring
-
ECS-5
-
ECS-5
-
ECS-5
-
ECS-5
-
ECS-5

Advertisement

loading
Need help?

Need help?

Do you have a question about the SS-1005A-B and is the answer not in the manual?

Questions and answers

Summary of Contents for BONKOTE SS-1005A-B

  • Page 1 CERAMIC SOLDERING IRON SYSTEM SS-1005A・B / SS-5000FP User’s Guide Thank you for purchasing SS series soldering irons. Please read this guide before use, and keep it after read. CAUTION  Do NOT touch the soldering irons with wet hands in order to prevent electrical hazards including fatal shocks. . ...
  • Page 2 HOW TO REPLACE IRON TIP AND HEATER ※ Before the replacement, pull out the plug of iron and wait until the iron tip cools down IRON TIP 1. Disassemble cover nut, heater cover and iron tip. 2. Replace the tip, and then assemble those parts in reverse order. HEATER 1.

This manual is also suitable for:

Ss-5000fp