System Setup; Device Manager; Sound Driver - Panasonic TOUGHBOOK CF-71 Series Operating Instructions Manual

(@) When the message [Press F1 for Setup] 1s dis-
played, press (FD and then run the Setup Utility
Select [Load Default Settings (PnP)], then press
At the confirmation message, press (Enter )
(6) In [Power Management], set [Power Saving] to
[OFF] and set [Sleep Switch] to [No Action], press
(Esc)
© Save the settings and then close the Setup Utility
The computer will reboot, and will then return to
the display shown ın step?
@ Windows 95 (reinstalling)
3 Select [3 Restore the HDD to factory default]
4 Atthe confirmation message, press any key
5 When your computer prompts you to insert the
FIRSTAID CD, please set the specified CD and press
any key
6 When your computer prompts you to insert the "Win-
dows 95 CD-ROM", please set the specified CD and
press any key
7 When the [To continue, press ENTER
press
After Microsoft ScanDisk completes, the computer
will automatically return to the Windows 95 setup
Simply follow the on-screen instructions
] appears,
@ With the exception of the instruction below, please
select all default values displayed by the Setup
Wizard Be sure to add the check mark y to [Sound,
MIDI, or Video Capture Card] at the [Analyzing
Your Computer]
@ Have a floppy disk on hand to create a "Windows
95 Startup Disk" Immediately after creating this
disk, enter the FIRSTAID FD into the floppy disk
drive and press [OK] (Note A system error will
result if the FIRSTAID FD 1s not inserted If this
occurs insert the FIRSTAID FD and press [Retry] )
8 At the [Finishing Setup], remove the floppy disk and
press {Fimsh] Windows will restart after all the set-
tings have automatically been made
9 At the [Date/Time Properties], press [Close]
70 At the [Add Printer Wizard], press [Cancel]
11 When the display appears indicating the establish-
ment of the system settings, press [OK] The com-
puter will reboot
@ System setup
72 In [Start] - [Run], tnput [c \install bat], then press
[OK] Rebooting will be done automatically
It may take several minutes to reboot the computer
73 In [Start] - [Programs] - [Windows Explorer] delete
the "c \install bat" and "c \install pif" files
@ Device manager 1
14 In [Start] - [Settings] - [Control Panel] - [System] -
[Device Manager}, select [PCIC or compatible
PCMCIA controller] in [PCMCIA socket] Remove
the check for [Disable ın this hardware profile] in
[Properties] - |General] and then press [OK]
15 Press [Next] at the display for the [Welcome to the
PC Card (PCMCIA) Wizard], press [Next] again and
then press {Finish}
16 The display will ask you to restart Windows, press
[No]
17 Check [View devices by connection] at [Device Man-
ager} and select [PCI bus] in [Plug and Play BIOS],
press [Remove], then press [OK] The display will
ask you to restart Windows, press [Yes] Rebooting
will be done automatically Ifthe computer asks you
to insert the Windows 95 Disk, press [OK] Input
[c \cabs], then press [OK]
@ Then, when the [Version Conflict] appears, select
[Yes]
18 Press [Next] at the [Update Device Driver Wizard of
Standard PCI Graphics Adapter (VGA)] and [Finish]
The display will ask you to restart Windows, press
[Yes]
79 Press [Next] at the [Update Device Driver Wizard of
PCI Universal Serial Bus] and [Finish]
The display will ask you to restart Windows, press
| Yes]
@ Sound driver
20 In [Control Panel] - [System] -[Device Manager], for
each item in [Sound, video and game controller], press
[Remove} to delete ıt then press [OK] to confirm the
deletion
è At the message to restart the computer (only once),
select [No]
21 Press [Refresh] and press [Next] at the [Update De-
vice Driver Wizard of Unknown Devices]
22 Select [Other Locations], input [c \util\drivers\sound],
then press [OK]
23 At the [Update Device Driver Wizard of YAMAHA
OPL3-SAx Sound System], press [Finish]
@ Video driver
24 In (Device Manager] - [Display adapters] - [Standard
PCI Graphics Adapter (VGA)] - [Driver] - [Update
Driver], select [Yes (Recommended) ], then press
[Next]
25 Select [Other Locations], input [c \utidrivers\video)],
press [OK], then press [Finish] The display will ask
you to restart Windows, then press [Yes]
@ Touch pad driver
26 In [Start] - [Settings]- [Control Panel] - [Mouse] - [Gen-
e1al] - [Change] - [Have Disk], input
[c \util\drivers\mouse} and press [OK] Select [touch
pad], press [OK] and then press [Close] The display
will ask you to restart Windows, then press | Yes]
21
D)
Cc
=
O
Q
£
n
&
2
=
©
j=