North American Tool 8463 Important Operating Instructions

20 gallon air compressor kit

Advertisement

20 GALLON AIR COMPRESSOR KIT
DO NOT RETURN TO STORE
Please call 800-348-5004 for
parts and service
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of California
to cause cancer and birth
defects or other reproductive
harm. Wash hands after
handling.
Important!
When using equipment, a few
safety precautions must be
observed to avoid injuries and
damage. Please read the complete
operating manual with due care.
Keep this manual in a safe place,
so that the information is available
For Customer Service: Call 1-800-348-5004 or Email feedback@natitools.com
at all times. If you give the
equipment to any other person,
give them these operating
instructions as well. We accept
no liability for damage or
accidents which arise due to
non-observance of these
instructions and the safety
information herein.
SPECIFICATIONS
Horsepower: 2 HP Running
Maximum PSI: 125 PSI
Tank Capacity: 20 Gallons
CFM: 6 CFM @ 40 PSI
5 CFM @ 90 PSI
CAUTION:
FOR YOUR OWN SAFETY,
READ INSTRUCTION
MANUAL COMPLETELY AND
CAREFULLY BEFORE
OPERATING THIS 20
GALLON AIR COMPRESSOR.
Any failures made in
following the safety
regulations and instructions
may result in an electric
shock, fire and/or serious
injury.
1
Model: 8463
FEATURES
• Dual quick-connect manifold
for running multiple tools
• Space-saving vertical
design
• Oil-lubricated solid cast iron
pump for extended life and
heavy-duty use
• Reliable direct drive motor
• Side port valve for stationary
applications
SAFETY
INSTRUCTIONS
To reduce the risk of fire or
explosion, never spray
flammable liquids in a
confined area. It is normal for
the motor and pressure
switch to produce sparks
while operating. If sparks
come into contact with vapors
from gasoline or other
solvents, they may ignite,
causing a fire or explosion.
Always operate the
compressor in a well-
ventilated area. Do not smoke
while spraying. Do not spray
where sparks or flames are
present. Keep compressor as
far away from the spray area
as possible.
8808463
02/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8463 and is the answer not in the manual?

Questions and answers

Summary of Contents for North American Tool 8463

  • Page 1 20 GALLON AIR COMPRESSOR KIT Model: 8463 DO NOT RETURN TO STORE at all times. If you give the FEATURES equipment to any other person, • Dual quick-connect manifold Please call 800-348-5004 for give them these operating parts and service for running multiple tools instructions as well.
  • Page 2: Operation Principle

    The solvents trichloroethane Protect the air hose and operate with the shroud and Methylene Chloride can electric cord from damage and removed. Allow the compressor chemically react with aluminum puncture. Inspect them weekly parts to cool before handling or used in paint spray guns, paint for weak or worn spots and servicing.
  • Page 3 The air valve in the cylinder OPERATION, After 16 hours of operation, head makes the natural air open the petcock and drain the LUBRICATION, AND enter into the cylinder through water from the tank. Clean the MAINTENANCE the air filter, tank once every 6 months.
  • Page 4 Symptom Possible Cause(s) Corrective Action Check to see if it is plugged in. No electrical power Check the fuse/breaker Replace blown fuse Blown fuse Compressor will not Reset. Determine why the problem Breaker down happened Motor will restart when cool (approx. Thermal overload open 15 minutes) Contact authorized service center...
  • Page 5 Symptom Possible Cause(s) Corrective Action Check for air leaks. Use sealing Loose connections (fittings, tubing, etc.) tape on all leaking connections Tighten draincock Open draincock Tank pressure drops Disassemble check valve when compressor assembly. Clean or replace. shuts off Check valve leaking DANGER! Do not disassemble check valve with air in tank.
  • Page 6 North American Tool Industries (NATI) makes every effort to ensure that this product meets high quality and durability standards. NATI warrants to the original retail consumer a 1-year limited warranty from the date the product was purchased at retail and each product is free from defects in materials.
  • Page 7 20 GALLON AIR COMPRESSOR KIT Model: 8463 For Customer Service: Call 1-800-348-5004 or Email feedback@natitools.com 8808463 02/13...
  • Page 8 Description QTY. Description QTY. Bolt M6x55 circlip 14 Spring Washer M6 screw m4x6 Cylinder Head grounding signal Exhaust Elbow washer 4 Gasket of Cylinder Head shroud Valve Plate tapping screw ST4.2x12 valve reed washer m5 gasket of valve plate boit m6x18 Gasket of cylinder upper oil fill cap cylinder...
  • Page 9: Specifications

    HVLP TOUCH UP SPRAY GUN DO NOT RETURN TO STORE at all times. If you give the Any failures made in equipment to any other person, following the safety Please call 800-348-5004 for give them these operating regulations and parts and service instructions as well.
  • Page 10 The tool will do the job better Never use oxygen, carbon Chlorinated solvents such as and safer at the rate at which it dioxide, combustible gases, or 111-Trichlorethane and was intended. any other bottled gas as a power Methylene Chloride (also known source for this tool.
  • Page 11: Cleaning And Maintenance

    OPERATING WARNING CLEANING AND INSTRUCTIONS MAINTENANCE During operation, never remove the fluid control valve. OPERATION 1. Flush the material-conveying REDUCING THE parts of the gun thoroughly with WARNING thinner. MATERIAL VOLUME Check to see that all nuts and 2. Clean the air nozzle with a The volume of material flowing bolts are tight.
  • Page 12 Symptom Possible Cause(s) Corrective Action Clean the fluid needle and fluid Foreign substances between fluid tip Gun leaks from fluid tip nozzle with thinner or use a new and needle preventing sealing set of nozzles. Paint merges from fluid Self tensioning needle sealing needle - needle Replace needle sealing damaged or lost...
  • Page 13 North American Tool Industries (NATI) makes every effort to ensure that this product meets high quality and durability standards. NATI warrants to the original retail consumer a 1-year limited warranty from the date the product was purchased at retail and each product is free from defects in materials.
  • Page 14 HVLP TOUCH UP SPRAY GUN For Customer Service: Call 1-800-348-5004 or Email feedback@natitools.com...
  • Page 15 Description Description Air Nozzle w/ Brass Cap Air Piston Complete Fluid Nozzle Spring for Air Piston Piston Ring Spindle Complete Compression Screw Control Knob Sealing for Air Piston Counter Sunk Screw Air Adjust Valve Assembly Compression Spring for Needle Seal Air Correction Piece R 1/4 inch Gun Body Locking Plate...
  • Page 16: California Proposition

    3/8 INCH AIR RATCHET WRENCH SAFETY INSTRUCTIONS accidents which arise due to non- CALIFORNIA PROPOSITION 65 observance of these instructions WARNING: You can create dust 1) Keep work area clean and well and the safety information herein. when you cut, sand, drill or grind lit.
  • Page 17: Connecting Tools

    9) Use clamps or other practical 2) Push frontward with the thumb way to secure and support the to release the safety lock and piece a stable platform. Holding 1) Remove the top that is then push the lever to start the the work piece against your body covering the air intake valve and tool rotation.
  • Page 18 When the tool is seriously damaged or no longer functioning, recycle it according to local laws and regulations. Replacement Parts Contact North American Tool Industries (NATI) directly for all replacement parts and service needs. When ordering, be sure to have the spare part number and tool model #.
  • Page 19 North American Tool Industries (NATI) makes every effort to ensure that this product meets high quality and durability standards. NATI warrants to the original retail consumer a 1-year limited warranty from the date the product was purchased at retail and each product is free from defects in materials.
  • Page 20 3/8 INCH AIR RATCHET WRENCH For Customer Service: Call 1-800-348-5004 or Email feedback@natitools.com...
  • Page 21 Description Quantity Description Quantity Housing Ratchet Yoke Connection Head Cylinder Trigger Rotor Roll Pin Rotor Blade Valve Front Plate Front Bearing O-Ring Spring Real Plate Valve Plug Real Bearing O-Ring Cylinder Pin Washer Thrust Washer (3/8in.) Thread Ring Gear Thrust Washer (1/2in.) Clamp Nut Spring Idler Gear...
  • Page 22 1/2 INCH AIR IMPACT WRENCH CALIFORNIA PROPOSITION 65 accidents which arise due to SAFETY non-observance of these INSTRUCTIONS WARNING: You can create dust instructions and the safety when you cut, sand, drill or grind information herein. 1) Keep the work area clean materials such as wood, paint, and well lit.
  • Page 23: Maintenance

    using this tool. Keep proper 16) Do not attempt to use the 4) To change the direction of the footing and balance at all times. tool when unplugged from the air rotation, push the pin towards the F source. to screw clockwise (in) and R to 9) Use safety equipment.
  • Page 24 When the tool is seriously damaged or no longer functioning, recycle it according to local laws and regulations. REPLACEMENT PARTS Contact North American Tool Industries (NATI) directly for all replacement parts and service needs. When ordering, be sure to have the spare part number and tool model number.
  • Page 25 North American Tool Industries (NATI) makes every effort to ensure that this product meets high quality and durability standards. NATI warrants to the original retail consumer a 1-year limited warranty from the date the product was purchased at retail and each product is free from defects in materials.
  • Page 26 1/2 Inch Air Impact Wrench For Customer Service: Call 1-800-348-5004 or Email feedback@natitools.com...
  • Page 27 Description Quantity Description Quantity Cap Screw Spring Pin Spring Washer Rotor Blade Protecting Rubber Rotor Anvil Collar Rear End Plate Anvil Ball Bearing Hammer Cage Rear Gasket Drive Cam Rear Cover Hammer Dog Cap Screw Hammer Pin Spring Washer Trigger Air Inlet Bushing Oiling Screw Spring...

Table of Contents