North American Tool 9528 Important Operating Instructions

9 GALLON 6.5HP TWIN TANK
GAS AIR COMPRESSOR
DO NOT RETURN TO
STORE. Please CALL
800-348-5004 for parts
and service.
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of California
to cause cancer and birth
defects or other reproductive
harm. Wash hands after
handling.
Important!
When using equipment, a few
safety precautions must be
observed to avoid injuries and
damage. Please read the complete
operating manual with due care.
Keep this manual in a safe place,
so that the information
For customer service, call 1-800-348-5004 or email feedback@natitools.com
is available at all times. If you
give the equipment to any other
person, give them these
operating instructions as well.
We accept no liability for
damage or accidents which
arise due to non-observance of
these instructions and the
safety information herein.

SPECIFICATIONS

Engine: 6.5 HP OHV
Tank capacity: 9 gallons
Pressure: 115 PSI
Speed: 1150 RPMs
12 CFM @ 90 PSI
CAUTION:
FOR YOUR OWN SAFETY,
READ INSTRUCTION
MANUAL COMPLETELY AND
CAREFULLY BEFORE
OPERATING THIS GAS
COMPRESSOR.
Any failures made in
following the safety
regulations and instructions
may result in an electric
shock, fire and/or serious
injury.
Model: 9528, 7295
SAFETY INSTRUCTIONS
1) Only persons who are
familiar with these
instructions and warnings
should operate this
compressor.
2) Do not allow children in the
work area and keep visitors
back away from equipment.
3) Use safety glasses and
hearing protection when you
are operating this unit.
4) Do not stand on the unit or
use it as a handhold.
5) Before each use, inspect
the compressor for signs of
damage, deterioration,
weakness or leakage. Repair
or replace damaged items
before use.
6) Check the fasteners at
frequent intervals to ensure
proper tightness.
7) Motors, electrical
equipment and their
8809528 06/12