Table of Contents
Advertisement
Quick Links
FACTORY SERVICED
8 Gallon Air Compressor
90-DAY LIMITED WARRANTY
FOR NON-COMMERCIAL USE
STOP
DO NOT RETURN THIS
PRODUCT TO THE RETAILER!
Replacement parts:
Replacement parts for this tool are
available at our authorized services
centers across the USA. For
servicing, contact us at the email
address or 800# below. Please be
prepared to provide the model#
located below the pump on the
product (directly above the UPC
code) and purchase date along
with your proof of purchase. Please
use the 4 digit number listed in the
parts breakdown diagram for all
parts orders (where applicable).
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood,paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of
California to cause cancer
and birth defects or other
reproductive harm. Wash
hands after handling.
Breathable Air Warning:
This compressor/pump is not
equipped and should not be
used "as is" to supply
breathing quality air. For any
application of air for human
consumption, the air
compressor/pump will need
to be fitted with suitable in-
line safety and alarm
equipment. This additional
equipment is necessary to
properly filter and purify the
air to meet minimal
specifications for Grade D
breathing as described in
Compressed Gas Association
Commodity Specification G
7.1 - 1966, OSHA 29 CFR
1910. 134, and/or Canadian
Standards Associations
(CSA).
feedback@natitools.com
Model: 42801
Important Safety
Instructions
RISK OF EXPLOSION OR
FIRE:
It is normal for electrical
contacts within the motor and
pressure switch to spark.
Always operate the
compressor in a well
ventilated area free of
combustible materials such
as gasoline and solvent
vapors. If spraying flammable
materials, place the
compressor at least 20 feet
away from the spray area (an
additional length of hose may
be required).
If electrical sparks from the
compressor come in contact
with flammable vapors, they
may ignite, causing fire or
explosion. Covering any of
the compressor ventilation
openings will cause serious
overheating and possibly fire.
NM00000OP 3/10
89042801
Advertisement
Table of Contents
Related Manuals for North American Tool 42801
Summary of Contents for North American Tool 42801
- Page 1 FACTORY SERVICED Model: 42801 8 Gallon Air Compressor 90-DAY LIMITED WARRANTY WARNING: This product or its Important Safety FOR NON-COMMERCIAL USE power cord may contain Instructions chemicals, including lead, RISK OF EXPLOSION OR STOP known to the State of FIRE:...
- Page 2 Store flammable materials in a Excessive vibration can weaken AIR COMPRESSOR secure location away from the the air tank and cause rupture or SPECIFICATIONS AND compressor. Never place explosion. Exceeding the ELECTRICAL INFORMATION objects against or on top of the operating pressure of air tools Specifications: compressor.
- Page 3 If this compressor malfunctions 3-prong grounding type plugs and CHECK VALVE (A) FIG.3 or breaks down, grounding 2-hole receptors. When the air compressor is provides a path of least operating, the check valve is For circuits that are further away resistance for the electric current ‘open’, allowing compressed from the electrical circuit box, the...
- Page 4 PRESSURE SWITCH (D) FIG.5 TANK PRESSURE GAUGE (H) The pressure switch automatically FIG. 5. The tank starts the motor when the tank pressure gauge indicates the air pressure drops below the factory pressure in the tank. set ‘cut-in’ pressure. It also stops SAFETY VALVE (I) FIG.
-
Page 5: Additional Regulators And Controls
DOING THE FOLLOWING WARNING: Too much air compressor runs cooler and BREAK-IN PROCEDURES. pressure causes a hazardous provides longer service. The SERIOUS DAMAGE MAY risk of bursting. Check the ventilation openings on your air RESULT IF THE FOLLOWING manufacturer's maximum compressor are necessary to BREAK-IN INSTRUCTIONS ARE pressure rating for air tools... -
Page 6: Maintenance
10. Drain water from air tank. 4. Be sure all nuts and bolts are FAILURE TO START If your compressor fails to start, Turn drain valve (B) Fig. 4, tight. check to make sure the plug is clockwise to open. properly connected to the outlet. - Page 7 Symptom Possible Cause(s) Corrective Action -Check voltage, eliminate extension cord or reset -Fuse blown or circuit breaker tripped - Not starting Loose electrical connections -Check wiring connections Overheated motor -Press the reset button or wait for automatic reset (15 minutes) -Check valve manually by pulling -Air leak in safety valve upwards on ring.
- Page 8 North American Tool (NAT) Industries makes every effort to ensure that this product meets high quality and durability standards. NAT warrants to the original retail consumer a 90-Day limited warranty from the date the product was purchased at retail and each product is free from defects in materials.
- Page 9 feedback@natitools.com 89042801...
- Page 10 feedback@natitools.com...
Need help?
Do you have a question about the 42801 and is the answer not in the manual?
Questions and answers