North American Tool 51850 Important Operating Instructions

60 GALLON COMPRESSOR
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of California
to cause cancer and birth
defects or other reproductive
harm. Wash hands after
handling.
CAUTION:
FOR YOUR OWN SAFETY READ
INSTRUCTION MANUAL
COMPLETELY AND CAREFULLY
BEFORE OPERATING THIS
COMPRESSOR.
Failure to follow all instructions
as listed below may result in
electrical shock, fire, and/or
serious personal injury.
Breathable Air Warning:
This compressor/pump is not
equipped and should not be
used "as is" to supply
breathing quality air. For any
application of air for human
consumption, the air
compressor/pump will need
to be fitted with suitable in-
line safety and alarm
equipment. This additional
equipment is necessary to
properly filter and purify the
air to meet minimal
specifications for Grade D
breathing as described in
Compressed Gas Association
Commodity Specification G
7.1 - 1966, OSHA 29 CFR
1910. 134, and/or Canadian
Standards Associations
(CSA).
SPECIFICATIONS:
Tank Size: 60 gallons
CFM: 11.5 @ 40PSI;
10.2 @ 90 PSI
Horsepower (Running): 3HP
Max Pressure: 135 PSI
Thermal overload protection
feedback@natitools.com
Model: 51850, 52332
SAFETY WARNINGS
1) Follow all electrical and
safety codes along with
National Electrical Codes
(NEC) and Occupational
Safety and Health Act
(OSHA).
2) Electric motors and
starters must be securely and
properly grounded.
3) Do not allow the cable to
come into contact with oil,
grease, chemicals or sharp
objects. Do not allow kinks to
form in the cable.
4) Do not exceed the
pressure limits for any
component in or connected to
the system.
5) Inspect the compressor to
make sure that all the fittings,
bolts, etc., are tight and
secure before starting the
compressor.
6) Do not touch the
compressor or motor while it
is in operation. These parts
become HOT during
88051850 04/12