Brother HL-L1240W Quick Setup Manual

D03AMT001-00
Version 0
EN
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies.
A5 Paper Long Edge Support
1
Remove the packing materials and install the toner cartridge
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
Printer LED Indications
Ready
Power Off
Data Remaining
Quick Setup Guide
HL-L1240W / HL-L1242W / HL-L1242WXL
UK
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available on the Brother support website:
support.brother.com/manuals
Toner Cartridge Toner Cartridge Replacement
Quick Setup Guide
Front
Sleep Warming Up
Deep Sleep Cooling Down
Dimmed 1 second interval
NOTE:
• The components included in the box may differ depending on your country.
• The available connection interfaces vary depending on the model.
(HL-L1242WXL only.
• The screens and images in this Quick Setup Guide show the HL-L1242W.
Save for later use.)
• Brother aims to reduce waste and save both raw materials and the energy
required to produce them.
Read more about our environmental work at www.brotherearth.com.
• Save all packing materials and the box in case you need to ship your
Product Safety Guide
machine.
For the long edge of A5 paper
Receiving Data Toner Low
0.5 second interval
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres long.
Make sure the printing
surface is face up.
Adjust the paper guides to fit the
Blinking:
Replace Toner Paper Jam
paper being used.
or ON: OFF:
Drum End Soon
Replace Drum