Brother HL-L1228 Quick Setup Manual

CHN-ENG
Version 0
EN
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies.
USB Interface Cable
1
Remove the packing materials and install the toner cartridge
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
Printer LED Indications
Ready
Power Off
Data Remaining
Quick Setup Guide
HL-L1228 / HL-L1238W / HL-L1808W
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Operation Videos:
www.95105369.com
Toner Cartridge A5 Paper Long Edge
Support
Quick Setup Guide Product Safety Guide
Take out drum unit
Front
Sleep Warming Up
Deep Sleep Cooling Down
Dimmed 1 second interval
Installation & Using Videos
Drum Unit
(Installed in the machine)
Toner cartridge
For the long edge of A5 paper
Receiving Data Toner Low
0.5 second interval
NOTE:
• The available connection interfaces vary depending
on the model.
USB cable
We recommend using a USB 2.0 cable
(Type A/B) that is no more than 2 metres long.
• The screens and images in this Quick Setup Guide
show the HL-L1238W.
• Save all packing materials and the box in case you
need to ship your machine.
Make sure the printing
surface is face up.
Adjust the paper guides to fit the
Blinking:
Replace Toner Paper Jam
paper being used.
or ON: OFF:
Drum End Soon
Replace Drum
1