ViewSonic IFP7533 Manual
  1. Manuals
  2. Brands
  3. ViewSonic Manuals
  4. Monitor
  5. ViewBoard IFP7533
  6. Manual
ViewSonic IFP7533 Manual

ViewSonic IFP7533 Manual

Hide thumbs Also See for IFP7533:
Table of Contents

Advertisement

Quick Links

Download this manual
8/5/25, 12:36
IFP7533
Package Contents
NOTE: The power cord and video cables included in your package may vary
depending on your country. Please contact your local reseller for more information.
Power Cord (3 m)
Remote Control
AAA Battery
USB Touch Cable (3 m)
Touch Pen x 2 (VP-PEN-009)
Quick Start Guide
Compliance Statement
RS-232 Adapter
Clamp x 5
Camera Plate
Screw x 8
HDMI Cable (3 m)
Wall Mount Kit Specifications (VESA)
Please follow the instructions in the wall mount installation guide to install your wall mount or
mobile mount bracket. If attaching to other building materials, please contact your nearest dealer.
https://manuals.viewsonic.com/IFP7533_Full_Guide
IFP7533 - ViewSonic ViewBoard
1/93

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IFP7533 and is the answer not in the manual?

Questions and answers

Related Manuals for ViewSonic IFP7533

Summary of Contents for ViewSonic IFP7533

  • Page 1 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard IFP7533 Package Contents NOTE: The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information. Power Cord (3 m) Remote Control...

  • Page 2: Product Overview

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard VESA Spec. Standard Screw Model Quantity (A x B) (C x D) IFP7533 - 75” 800 x 400 mm M8 x 25 mm Important: Do not use screws that are longer than the standard dimension, as they may cause damage to the inside of the display.
  • Page 3 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Control Panel and Front I/O https://manuals.viewsonic.com/IFP7533_Full_Guide 3/93...
  • Page 4 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Number Description Press to turn ON the device Press to turn OFF/ON the display backlight only Press and hold to turn OFF the device Remote control receiver Ambient Light Sensor USB Type C input...
  • Page 5 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Number Port Description Serial interface RS-232 For mutual transfer of data between devices Standard RJ45 (10M/100M/1G) internet For ViewBoard and Slot-in PC use USB Type A input USB Type Connect USB devices such as hard disks, keyboard, mouse, etc.

  • Page 6: Remote Control Overview

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Remote Control Overview Remote Control Number Description Power ON/OFF Mute/Unmute Sleep Mode For Non-Android sources; display current input source information Blank screen Freeze screen Numeric input buttons Slot-in computer, space bar Alt+Tab Slot-in computer, close program window...

  • Page 7: Remote Control Effective Range

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard [Backspace] button [Windows] button [Menu] button Writing software setup Return button Scroll up, down, left, and right Confirm selection/state Shortcut button to exit dialogue boxes CH+: PC previous page CH-: PC next page Increase/Decrease volume...
  • Page 8 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Replacing the Batteries of the Remote Control 1. Remove the cover on the rear of the remote control. 2. Insert two “AAA” batteries, ensuring the “+” symbol on the battery matches the “+” on the battery post.

  • Page 9: Using Gestures

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Using Gestures Touch gestures allow the user to use pre-determined commands without using a keyboard or mouse. Using gestures on the ViewBoard, the user can select/deselect objects, change the location of an object, access settings, erase digital ink, and much more.

  • Page 10: Hdmi Connection

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard To connect via USB Type C: Connect a USB Type C cable from your external device to the Type C port on the ViewBoard. HDMI Connection To connect via HDMI: 1. Connect an HDMI cable from your external device to the HDMI 1/2/3 port on the ViewBoard.

  • Page 11: Usb Peripherals

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Just like any PC, it is easy to connect various USB devices and other peripherals to your ViewBoard. USB Peripherals Plug the USB device cable into the USB port. Networking and Modem cables Plug the network cable into a LAN port.

  • Page 12: Audio Out

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard To play audio from your external device through the ViewBoard’s speakers, connect one end of an audio cable to your external device, and the other end to the ViewBoard’s AUDIO IN port. Audio Out To play audio from the ViewBoard through an external speaker, connect one end of an audio cable to the external speaker, and the other end to the ViewBoard’s AUDIO OUT port.
  • Page 13 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Powering ON/OFF your ViewBoard 1. Ensure the power cord is connected, plugged into a power outlet, and the power switch is in the “ON” position. 2. Press the Power button to turn on the ViewBoard.

  • Page 14: Toolbar Icons

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard To launch an application or tool: 1. Tap a Toolbar trigger icon. 2. Tap on your desired application or tool icon. Toolbar Icons Icon Description Return to the previous operation screen. Back Return to the Home Screen of the Embedded Player.
  • Page 15 Stream whiteboarding sessions. Miracast Miracast wirelessly streams content from Windows and Android devices to a ViewBoard. myViewBoard Manager Remotely manage multiple installations of ViewSonic devices. myViewBoard Whiteboard A digital whiteboarding application. Palette Select a color and adjust the saturation levels.
  • Page 16 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Access the General Settings. Menu Annotate the overlay of any input source with a pen or brush. Mark Take a screenshot of the current screen and resize. Crop View more applications within the toolbar.

  • Page 17: Control Bar

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Split-Screen Split the screen to display two different applications on the display. Screen Lock Lock the display’s screen for added security. Calculator Use for mathematical calculations. Control Bar Frequently used settings and tools can be accessed quickly through the Control Bar.
  • Page 18 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Item Description Select the input source. Input Source Adjust the brightness level of the display. Brightness Adjust the volume level of the display. Sound If a USB storage device is connected, the USB icon will be visible.
  • Page 19 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Shortcut to Wireless & Network Wi-Fi settings. Enable or disable Wi-Fi and connect to a wireless network. Wireless Shortcut to Date & Time settings. Set the date and time of the display. Date &...

  • Page 20: Input Menu

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Input Menu Display Menu Audio Menu Open the OSD Menu by touching the Menu icon ( ) in the Toolbar or the Input Source icon ( ) of the Control Bar. https://manuals.viewsonic.com/IFP7533_Full_Guide 20/93...

  • Page 21: Input Settings

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Input Settings To select an Input Source: 1. Press INPUT on the remote control or touch the Menu icon ( ) from the Toolbar or the Input Source icon ( ) of the Control Bar to display the Input Settings menu.
  • Page 22 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard 1. Press INPUT on the remote control or touch the Menu icon ( ) from the Toolbar or the Input Source icon ( ) of the Control Bar to display the Input Settings menu.

  • Page 23: Display Settings

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard 1. Press INPUT on the remote control or touch the Menu icon ( ) from the Toolbar or the Input Source icon ( ) of the Control Bar to display the Input Settings menu.
  • Page 24 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Display Settings - Menu Options Item Description Automatic brightness adjustment. Adjusts Auto maximum brightness according to ambient light Brightness levels. Energy Enable to reduce power consumption. Saving Adjusts the filter that blocks high-energy blue light Eye Care for a more comfortable viewing experience.

  • Page 25: Audio Settings

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Mode Description Standard Default color space standard. Precise color gamut and gamma sRGB of the sRGB standard. Precise color gamut and gamma AdobeRGB of the Adobe RGB standard. Precise color gamut and gamma Display-P3 of the Display-P3 standard.
  • Page 26 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard To adjust the audio settings: 1. Press INPUT on the remote control or touch the Menu icon ( ) from the Toolbar or the Input Source icon ( ) of the Control Bar to display the Input Settings menu. Then select the Audio tab.
  • Page 27 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Mute Toggle mute ON or OFF. Low Blue Light Filter and Eye Health The Blue Light Filter blocks high-energy blue light for a more comfortable viewing experience. Calculating Breaks When viewing screens for extended periods, it is recommended to take periodic breaks from viewing.

  • Page 28: Network & Internet

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Neck Exercises Neck exercises can also help minimize eye strain. Relax your arms and let them hang at your sides, bend forward slightly to stretch the neck, turn your head to the right and to the left. Repeat as many times as needed.
  • Page 29 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard NOTE: Wi-Fi, Wireless hotspot and Bluetooth settings will appear when VB-WIFI- 004(optional) has been installed. Ethernet will disable automatically when Wi-Fi is enabled. Wi-Fi will disable automatically when Ethernet is enabled. Wi-Fi will disable when Wireless hotspot is enabled.
  • Page 30 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Setup and manage wireless access points. Tap the toggle button to turn Wi-Fi On or Off. Once On, you can: Add a Network, view Saved Networks, Refresh the network list, or view Advanced settings.
  • Page 31 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Tap Set up to set the Network name, Security, and Password. Bluetooth Manage connections, set the device name and discoverability. Tap the toggle button to turn Bluetooth On or Off. Once On, users can select a listed device to pair and connect to, rename their device, remove a device, or receive files.

  • Page 32: File Sharing

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard To create a VPN profile: 1. Go to: Settings > Network & Internet > VPN and tap Add VPN. 2. Key in the Name. 3. Select the VPN Type. 4. Choose to enable/disable PPP encryption (MPPE) and/or show Advanced options.
  • Page 33 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Wallpaper Users can change their wallpaper with default images (both still and live), or use their own by tapping My Photo and selecting the image file. Protection Toggle HDCP & Copyright On/Off, and set a Password for Screen Lock.
  • Page 34 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Preferences View and adjust Touch, Language, Keyboard & Input, Date & Time, Boot Mode & Advanced, Start up & Shut down, and Toolbar settings. Touch Adjust Touch Settings and toggle Touch Sounds and Windows Ink On/Off.
  • Page 35 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Language Adjust and choose the preferred language from the available languages. Keyboard & Input Method Enable/disable the visual keyboard and/or change the default input method. Tap on Settings to adjust the advanced keyboard settings.

  • Page 36: Boot Mode

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Item Description Automatic Date When enabled, the ViewBoard will automatically & Time synchronize the date and time via the Internet. Time Zone Select the appropriate time zone. Choose from 12-hour or 24-hour time format.
  • Page 37 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Item Description The embedded screen sharing Apps will Normal Mode run normally. The embedded screen sharing Apps will Secured Mode be removed. The system will automatically reboot, and Disable Embedded then the Embedded/ViewBoard OS will not appear.

  • Page 38: Toolbar Setting

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Item Description Startup Input Adjust the Startup Input preference. Decide what happens to the display when Display Setting there is no signal for HDMI, PC, or VGA when No Signal sources. Decide what happens when you press the Standby Mode Power button while the ViewBoard is ON.
  • Page 39 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Label Input Source Set labels for each input source that will be easily recognized when displayed. Source Toggle Wake up by active source, Signal auto search, and HDMI CEC and select Input port auto switch.
  • Page 40 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Item Description Wake up by The screen will turn on automatically after Active plugging in an HDMI cable when the screen is off. Source When enabled, if the current source does not Signal Auto...
  • Page 41 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard NOTE: Pre-loaded apps cannot be uninstalled. Not all apps support the move to USB storage feature. Not all apps support Clear Defaults. Apps View any running or installed applications. Tap on them for more detailed information and options.
  • Page 42 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Storage Users can check the storage status of their ViewBoard. Clone to USB Copy settings to an external USB drive. Display ID https://manuals.viewsonic.com/IFP7533_Full_Guide 42/93...
  • Page 43 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Assign a number to remote control the display by RS-232/LAN. To assign or change the Display ID, tap Change and input a number. NOTE: The Display ID is for RS-232 users, and the range is 01~99.

  • Page 44: Preinstalled Applications

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Item Description When the display is off, the system will automatically Auto check for a new version. If a new version is found, the Update system will automatically update. After the update is complete, the system will turn off.
  • Page 45 2. To stop the stream, locate and click the ‘End Stream’ button on the chosen service’s dashboard. NOTE: To learn more about myViewBoard Live, visit: https://wiki.myviewboard.com/MyViewBoard_Live < https://wiki.myviewboard.com/MyViewBoard_Live> . myViewBoard Manager Remotely manage multiple installations of ViewSonic devices. https://manuals.viewsonic.com/IFP7533_Full_Guide 45/93...
  • Page 46 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Once devices are set up and have myViewBoard Manager installed, they can be added to the entity and managed remotely from the Manager web application. NOTE: Only available to Entity Admins from myviewboard.com after signing in.
  • Page 47 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard To launch the screen recording application: 1. Select the myViewBoard Record icon in the application drawer. 2. Select the preferred recording configurations. 3. Tap the check mark and a three (3) second countdown will begin. Screen recording will begin immediately after the countdown.

  • Page 48: Floating Toolbar

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Floating Toolbar Item Description Move Move the Floating Toolbar. Switch between presentation and Present Mode preparation modes. Paste from Insert the current clipboard content Clipboard onto the canvas. Go to the previous page (if the Previous Page canvas has multiple pages).

  • Page 49: Background Management

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Open the built-in browser to access Embedded internet resources, which can be Browser dragged onto the canvas. Drag to move the canvas. Use two Infinite Canvas hands to zoom in/zoom out. Select again for an overview.
  • Page 50 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard NOTE: ViewBoard® Cast software, laptops, and mobile devices can connect to both the same subnet and cross subnet by entering the on-screen PIN code. Connected devices will show up under Device List on the same subnet connection.
  • Page 51 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Display Group Settings To adjust the Display Group Settings, select the Display Group icon ( ) located in the lower-right corner of the screen. https://manuals.viewsonic.com/IFP7533_Full_Guide 51/93...
  • Page 52 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard 1. Toggle the "Turn On/Off Display Group" ON to enable the Display Group feature. NOTE: Other preinstalled ViewBoard Cast devices in the same network will be listed. 2. Select the devices you want to join the display group and select OK to save the settings.
  • Page 53 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Synchronized Group Screen All the Time When the “Synchronized group screen all the time” function is toggled ON, it will display a synchronized group screen continuously. If it is toggled OFF, it will work on vCast mirroring only.
  • Page 54 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Moderator Mode Moderator Mode allows the moderator to take control of the devices connected to the ViewBoard. To enter Moderator Mode, select the Moderator Mode icon ( ) located in the lower-right corner of the screen.
  • Page 55 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Broadcast When enabled, the ViewBoard’s screen will be broadcasted to all of the participant’s connected screens simultaneously. The participants can only view the presentation contents until the moderator disables the Broadcast function. Multiple Screen Sharing By default, vCast is set to allow multiple screen sharing, but can also be set to single screen sharing.
  • Page 56 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard NOTE: Moderator Mode is supported on all vCastSender and AirPlay devices, but mobile devices are limited to a "preview" function. Additionally, mobile Android devices cannot cast sound out. When you cast your Windows/Mac/Chrome screen to a ViewBoard, the selected full screen unit will not be broadcasted back to your device to avoid repetitive screen casting.
  • Page 57 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard 4. To connect to the ViewBoard, input the PIN code and click OK. NOTE: The PIN code can be found as highlighted below: 5. Additionally, you can connect to the ViewBoard or display by clicking Device List then the Device Name listed.
  • Page 58 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard 1. Ensure the client device (e.g., Android phone or tablet) is connected to the same network as the ViewBoard. NOTE: The network name can be found under Room Network. 2. On the Android client device, scan the QR code shown on the ViewBoard to directly download the vCastSender application, or download the application from the Google Play Store.
  • Page 59 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard 4. To connect to the display, input the PIN code and select OK. NOTE: The PIN code can be found as highlighted below: 5. You can also connect to the ViewBoard by clicking Device List then the Device Name listed.
  • Page 60 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard 6. Additionally, you can connect to the ViewBoard by selecting Scan then placing the on-screen QR code into the box to automatically connect. Casting from Apple iOS Devices Apple AirPlay® is compatible with vCast for screen mirroring and content streaming under the same subnet environment only.
  • Page 61 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard 1. Ensure the client device (e.g., iPhone or iPad) is connected to the same network as the ViewBoard. NOTE: The network name can be found under Room Network. 2. On the iOS client device, directly open AirPlay and select the Device Name of the ViewBoard to connect.
  • Page 62 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard 3. Input the generated on-screen AirPlay Password on the client device to connect. NOTE: In a cross subnet environment, please download and connect with the vCastSender iOS application from the Apple App Store. 4. You can also connect to the ViewBoard by selecting Scan then placing the on-screen QR code into the box to automatically connect.
  • Page 63 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Item Description Toggle Hide or display the toolbar. Home Return to the Home interface. Return Return to the previous operation. Folder View or open the mobile device's files. Cast the mobile device's screen to the Share connected ViewBoard or display.
  • Page 64 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Folders Folders Overview Folder Icons https://manuals.viewsonic.com/IFP7533_Full_Guide 64/93...
  • Page 65 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Number Item Storage Device Display Icons File Type Menu File Information OfficeSuite Create, edit, and view Documents, Spreadsheets, Presentations, and PDFs. PIP (Picture-in-Picture) https://manuals.viewsonic.com/IFP7533_Full_Guide 65/93...
  • Page 66 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Split the screen into two parts, a main window and an inset window. NOTE: PIP only works between an Android application (browser, media player, vCast) and an external source. To open PIP, select: All Apps > PIP.
  • Page 67 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard For touch control of the connected external device, select Touch. To control the connected external device’s volume, select Sound. Select Enter to switch to the PIP input source. https://manuals.viewsonic.com/IFP7533_Full_Guide 67/93...
  • Page 68 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Screen Lock Set a screen lock password and enable screen lock. NOTE: If the user forgets the password, use the remote control and press INPUT- 0-2-1-4 to restore the password to default. To set a screen lock password: 1.
  • Page 69 Advanced Settings can also be customized to the user's needs. RS-232 This document describes the hardware interface spec and software protocols of RS-232 interface communication between ViewSonic LFD and PC or other control units with RS-232 protocol. The protocol contains three command sections: Set-Function...
  • Page 70 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard ViewSonic LFD communication port on the rear side: 1. Connector type: DSUB 9-Pin Male (or 3.5 mm barrel connector) 2. Use of crossover (null modem) cable for connection 3. Pin Assignment: Pin # Signal...

  • Page 71: Set-Function Listing

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Pin # Signal Remark Output from Display Output from Display Input to Display BI_D3+ For 1G case BI_D3- For 1G case Input to Display BI_D4+ For 1G case BI_D4- For 1G case frame RS-232 Communication Setting...
  • Page 72 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Length Total Byte of Message excluding “CR” Identification for each of Display (01~98; default is 01) ID “99” means to apply the set command for all connected displays. LFD ID Under such circumstances, only ID#1 display has to reply.
  • Page 73 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Reply (Hex Format) Name Length Command Type 0x30 0x34 0x2B 0x0D 0x32 Example 2: Set Brightness as 75 for Display (#02) and this; command is NOT valid. Send (Hex Format) Command Name Length Command...
  • Page 74 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Name Length Command Type 0x30 0x34 0x2D 0x0D 0x32 Set-Function Table A. Basic Function Set Function Length Command Command Value Range Comments Type Code Code (Three ASCII (ASCII) (ASCII) (Hex) bytes) 1. The Power-on...

  • Page 75: Optional Function

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard 000 ~ 100 900: Volume Volume down(-1) 901:Volume up(+1) 000: OFF Mute 001: ON (mute) 000: Unlock *See note in Button Lock 0001: Lock details 000: Unlock *See note in Menu Lock > 001: Lock details Number *3.1.1...

  • Page 76: Specifications

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Backlight 000: Off On_Off 001: On 000: Normal 001: Color Mode Warm 002: Cold 003: Personal Freeze 000: Off On_Off 001: On Bass 000~100 Treble 000~100 050 is Balance 000~100 central 000: FULL (16:9)

  • Page 77: Display Modes

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Item Category Specifications IFP7533 P/N. IFP7533-G Model VS19494 Display Modes VGA Mode Resolution Refresh Rate (@) 640 x 480 60Hz, 72Hz, 75Hz 720 x 400 70Hz 800 x 600 56Hz, 60Hz, 72Hz, 75Hz 832 x 624...

  • Page 78: Compliance Information

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard 1360 x 768 60Hz 1440 x 900 60Hz 1680 x 1050 60Hz 1920 x 1080 60Hz 3840 x 2160 30Hz, 60Hz 480i 60Hz 480p 59Hz, 60Hz 576i 50Hz 720p 50Hz, 60Hz 576p 50Hz 1080i...
  • Page 79 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard CAN ICES-003(B) / NMB-003(B) CE Conformity for European Countries The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE).

  • Page 80: Energy Star® Statement

    Product Disposal at End of Product Life ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more. USA & Canada https://www.viewsonic.com/us/go-green-with-viewsonic <...

  • Page 81: Copyright Information

    DisplayPort, and DDC are trademarks of VESA. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® partner, ViewSonic® Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
  • Page 82 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Asia Pacific & Africa Country / Region Website https://viewsonic.com/au/ < Australia https://viewsonic.com/au/> https://www.viewsonic.com/bd/ < Bangladesh https://www.viewsonic.com/bd/> https://www.viewsonic.com.cn < 中囯(China) https://www.viewsonic.com.cn> https://www.viewsonic.com/hk/ < 香港 (繁體中文) https://www.viewsonic.com/hk/> Hong Kong https://www.viewsonic.com/hk-en/ < (English) https://www.viewsonic.com/hk-en/> https://www.viewsonic.com/in/ < India https://www.viewsonic.com/in/>...

  • Page 83: Limited Warranty

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard https://www.viewsonic.com/vn/ < Việt Nam https://www.viewsonic.com/vn/> South Africa & https://www.viewsonic.com/za/ < Mauritius https://www.viewsonic.com/za/> Americas Country / Website Region https://www.viewsonic.com/us/ < United States https://www.viewsonic.com/us/> https://www.viewsonic.com/us/ < Canada https://www.viewsonic.com/us/> https://www.viewsonic.com/la/ < Latin America https://www.viewsonic.com/la/> Europe Country /...
  • Page 84 If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, and as your sole remedy, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.

  • Page 85: Mexico Limited Warranty

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Take or ship the product, freight prepaid, in the original container to an authorized ViewSonic® service center or ViewSonic®. For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®. Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.
  • Page 86 If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components &...
  • Page 87 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard ViewSonic®’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: Damage to other property caused by any defects in the product, damages based upon...
  • Page 88 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm <...
  • Page 89 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Col. Del Valle 03100, México, Col. Arcos Sur, Sector Juárez D.F. 44170, Guadalajara, Jalisco Tel: 01(52)55-50-00-27-35 Tel: 01(52)33-36-15-15-43 E-Mail E-Mail: mmiranda@servicrece.com (mai gacosta@qplus.com.mx (mailt lto:mmiranda@servicrece.com) o:gacosta@qplus.com.mx) Monterrey: Global Product Services Guerrero Acapulco: Mar Caribe # 1987, Esquina con Golfo Computación...
  • Page 90 ViewSonic®. It is dangerous to if liquid is spilled onto or objects fall continue using the device. in the unit...
  • Page 91 8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong.

  • Page 92: Troubleshooting Common Problems

    8/5/25, 12:36 IFP7533 - ViewSonic ViewBoard Never place the device in an unstable location. The device may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such Using cabinets or stands recommended by the manufacturer of the device.

  • Page 93: Why Is There No Sound

    Some chemical cleaners have been reported to damage the screen and/or case of the device. ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. Important: If condensation appears between the glass and the panel, keep the display turned on until the moisture disappears.

This manual is also suitable for:

Ifp7533-g

Table of Contents