Coby IR825 - Network Audio Player Instruction Manual page 45

Troubleshooting
If you have trouble connecting the radio to your
wireless network, these steps may help to resolve
the problem:
1. Confirm that a Wi-Fi connected PC can access the
Internet (i.e., can browse the web) using the same
network.
2. Check that a DHCP server is available, or that you
have configured a static IP address on the radio. You
can configure a static IP address on the radio by en-
tering System setup -> Network -> Manual setting->
Wireless, then selecting 'DHCP disable'.
3. Check that your access point does not restrict con-
nections to particular MAC addresses. You can view
the radio's MAC address by entering 'System setup ->
Network -> View setting-> MAC address'.
4. If you have an encrypted network, check that you
have entered the correct key or password into the
radio. Remember that text-format keys are case
sensitive. If, when attempting to connect to an
encrypted network, your radio displays: 'Wireless er-
ror' followed by a 5-digit number, then please ensure
that you enter the correct passcode for the network.
If the problem persists, you may need to consult your
network configuration.
If your radio can connect to the network success-
fully, but is unable to play particular stations, it
may be due to one of the following:
•
The station is not broadcasting at this time of the day
(e.g., it is located in a different time zone).
www.cobyusa.com Page 45