Getting Started
Troubleshooting your network
connection
If after trying to connect to your wireless network, the display
reads "Failed to connect," please take the following steps:
Ensure that your wireless access point and internet
modem are connected and working normally.
Try resetting your wireless access point and
internet modem (i.e., turn them off and then
back on again).
Move the radio to a location where the wireless
signal is stronger (e.g., closer to your wireless access
point).
Make sure that your password has been entered
correctly.
WEP/WPA passwords are case-sensitive.
To retrieve your access code or to get solutions
to frequently asked questions, move the display
highlight to the <HELP> menu and press [SELECT]
to confirm.
Page 12
Coby Electronics Corporation