Kurgo G-Train Manual

KEY:

1. Hip belt
2. Shoulder straps
3. Load lifter straps
4. Sternum strap
5. Leveling straps
6. Back pad pocket
7. Waist strap pockets
8. Carrier handle

As a Pack
First loosen hip belt (A), shoulder straps (B) and load lifter straps (C)
Place pack on back and position so the hip belt (A) sits right below the hipbone.
Buckle the hip belt, making sure that it is centered, and then grab both sides of the hip belt straps and cinch until comfortable.
Now, pull down on the excess shoulder straps (B) until the pack fits snug to your body.
Next, buckle the sternum strap (D) and lightly cinch. The sternum strap can be adjusted by sliding the attachment arms up or down. The sternum strap should rest about 5" below the collarbone.
Finally, clip the load lifter buckles (C) and then pull forward on the excess load lifter straps for a snug fit.
Remove the pack and place your dog in the dog pocket. If you are worried about your dog jumping out, you can also secure him in the pack using the internal tether that is located at the bottom of the dog pocket.
Once the dog is inside the pack you can adjust as needed for comfort. Please note that the G-Train K9 Pack is a soft- and not hard-sided pack. It will not maintain its shape perfectly once your dog is secured inside. As the dog moves, so too will the pack.
The leveling straps (E) can be tightened or loosened to help stabilize the load by leveling the bottom of the pack and raising its center of gravity.

As a Carrier
When you want to use the pack as a carrier, simply unhook the load lifter buckles (C) and the shoulder strap buckles (B) at the bottom. Unzip the back pad zipper (F) and stow the straps. The waist straps can also be stowed by tucking into the waist strap pockets (G) at the bottom of the back pad on either side of the waist straps.
Place the dog in the same dog pocket as when using it as a pack and carry using the carrier handle (H) on the front of the pack.