Kurgo Tru-Fit Smart Instructions And Care

Fitting the harness on your dog

1. Place upper neck straps (F) around pet's head
2. Wrap two lower straps (D) around pet's chest, behind front legs
3. Fasten Quick Release Buckles (C) on both sides
4. Adjust all straps to fit comfortably
Warning!
Do not use chest plate D-ring (G) or leash hitch (B) for securing in a vehicle.
Replace harness if it shows signs of wear or has been in a crash situation.

To use as a walking harness:

The Kurgo Tru-Fit Smart Harness™ is designed with the owner's and dog's
walking needs in mind. The front chest plate provides a centrally located
D-Ring for leash attachment, which helps deter your dog from pulling.
When your dog pulls, the force redirects them to one side or the other
as you walk together. This sends them back in your direction and reduces
pulling. The easy on-and-off design, and multiple adjustment points
makes the Kurgo harness a great alternative to other training harnesses
and collars.
For training purposes only, do not use with aggressive dogs.

To use as a vehicle seatbelt harness:

Securing your dog safely into the vehicle may be done in two ways.
A) Best Practice - to reduce excursion (pitching forward)
Attach the tether's carabiner (only) directly through the top layer of
webbing on the harness back strap (A), then attach all to the
secured vehicle seatbelt.
B) Good Practice
Loop the tether handle around the seatbelt, passing back through
itself, and then clip the carabiner to the harness back strap (A). This
way allows a little more freedom of movement for your dog.
Products displaying this symbol are intended to prevent dogs
from entering the front seat where they can interfere with the
driver and cause distracted driving accidents. They are intended
to serve as either physical barriers to the front seat or
REDUCES
restraints that keep pets from roaming around in the car. If used
DRIVER
properly, they should keep dogs from entering the front seat,
DISTRACTION
but they cannot guarantee containment nor protect from injury
HARNESS
in every situation.
RESTRAINT

Cleaning Instructions

Our product cleaning instructions will help ensure that your gear has a long, exciting life. Washing by hand
and hang air-drying is the best way to care for your Kurgo products.

Hand Wash Instructions

1. Brush off loose dirt with a dry brush.
2. Spot clean with a damp sponge, cold water, and mild soap. Avoid harsh detergents.
3. If necessary, rinse larger area to eliminate excess soap residue.
4. Hang to air dry (do not machine dry).
Please contact Kurgo directly with any product or warranty inquiries.
Kurgo Products 2D Fanaras Drive, Salisbury, MA 01952
•
Instructions and Care
877-847-3868
•
kurgo.com/product-instructions
A Back Strap
B Leash Hitch
C Quick Release Buckles
D Lower Chest Straps
A
F
G
On front,
not shown
E
in diagram
A
Best Practice
Seatbelt
www.kurgo.com info@kurgo.com
• •
4-15
E Padded Chest Plate
F Upper Neck Straps
G Chest Plate D-ring
FOR LEASH ONLY
Seatbelt tether and
C
carabiner
B
D
B
Good Practice
Seatbelt
NOTICE: For supervised use only.
Product is not intended to be chewed
or ingested. Inspect product regularly
for damage.
Product is intended to restrain your
pet and keep it from distracting you
while driving. This product has not
been crash tested and cannot
guarantee protection from injury in the
case of an accident.