UPPAbaby RUMBLESEAT V2 Manual

CLEANING + GENERAL MAINTENANCE

CLEANING:

• Clean frame with a damp cloth and a mild detergent; dry thoroughly. DO NOT use abrasives.
• If the frame parts have been exposed to salt water we recommend that they be rinsed with fresh (tap) water as soon as possible to avoid corrosion. Always dry frame if wet.
• All fabrics are removable.
• To extend the life of your product's fabric, keep it clean and do not leave it in direct sunlight for long periods of time.
• DO NOT fold or store the product if it is damp or wet, nor store in a damp environment.

MAINTENANCE AND REPAIR:

• This product requires user inspection and maintenance regularly. Check all connecting hardware (rivets, screws, etc.) for tightness and security. Inspect all brakes, tires, seat harnesses and locks for correct operation. Seek prompt repairs or replacements as needed and never continue using the product if it is structurally not safe.
• Only UPPAbaby replacement parts should be used. It may be unsafe to use parts supplied by another manufacturer.
• Contact Customer Service with any repair questions.

CLEANING SEAT FABRIC

Spot clean or hand wash in cold water with mild detergent. DO NOT bleach.	Dry flat and away from direct sunlight before re-use or storage.	DO NOT iron or dry clean.

CLEANING CANOPY FABRIC

Spot clean ONLY. DO NOT bleach.	DO NOT iron or dry clean.

CLEANING LEATHER BUMPER BAR COVER

Spot clean with a damp cloth. DO NOT wet excessively.	DO NOT iron or dry clean.

PRODUCT OVERVIEW

ATTACHING ADAPTER TO VISTA FRAME

FRONT/REAR FACING SEAT OPERATION

ATTACHING/REMOVING BUMPER BAR

REMOVING SEAT CANOPY

ADJUSTING CANOPY HEIGHT

ADJUSTING SHOULDER HARNESS HEIGHT

BUCKLE OPERATION

ADJUSTING HARNESS

REMOVING SEAT FABRIC

REMOVING CANOPY FABRIC

WARNINGS + GENERAL SAFETY INFORMATION

NEVER LEAVE CHILD UNATTENDED. FAILURE TO FOLLOW THESE WARNINGS AND INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH: To avoid serious injury from sliding or falling out, always use complete 5-point harness. Child may slip into leg openings and strangle.NEVER use in a reclined position unless child is secured in 5-point harness system. Unit may become unstable if manufacturer's recommended load is exceeded, or if parcel bag or accessory other than that recommended by the manufacturer is used or hung from the unit. Children and adults should be clear of moving parts while making stroller adjustments. Damage to fingers or extremities may occur when opening or closing the frame.

LOAD PRIMARY CHILD INTO THE MAIN SEAT FIRST.

• AFTER CHILD IS SECURED IN THE MAIN SEAT, PLACE SECOND CHILD INTO THE RUMBLESEAT.
• DO NOT place child in the RumbleSeat without a child in the main seat.

Keep these instructions for future reference.

• Intended for use only with UPPAbaby VISTA 2015+ and VISTA V2.
• This seat is suitable for children from 3 months until child is 35 lbs (15.9 kg) or 36 in (91.4 cm), whichever comes first.
• If loading your child into the RumbleSeat from the top, be careful of recline handle on main seat.
• DO NOT allow child to stand while in the RumbleSeat.
• DO NOT lean or press on the RumbleSeat with excessive force. Please follow the maximum weight guidelines.
• Always push the stroller with both hands when using the RumbleSeat.
• Stroller can fold with adapters attached, however, the RumbleSeat must be removed and the main seat must be facing forward and in an upright position.
• Before each use, inspect your adapters to make sure the brackets are fully engaged with the stroller. Audible "click" must be heard to confirm that each attachment is connected properly.
• Bumper bar must be attached at all times.
• DO NOT lift the stroller by the bumper bar as it may disengage.
• Always make sure stroller is fully open and locked before use.
• The brake must be locked while taking the child in or out of the stroller, and when parked.
• NEVER leave child in the stroller while ascending or descending stairs, or using an escalator.
• DO NOT make any alterations or modifications to the stroller with products not supplied by the manufacturer as this may cause instability or structural damage not covered under warranty.

The U.S. product is designed and manufactured to comply with ASTM F833-19 Standard Consumer Safety Performance Specification for Carriages and Strollers and is JPMA certified. The C.A. product is designed and manufactured to comply with Canadian standard SOR/2016-167 Carriages and Strollers Regulations.