Compatibility
ProBuilder 42 CF Fireplaces
Installation Warnings
NOTE: Consult the installation manual for order of installation. If using propane (LP), convert the appliance
before installing the log set. If using firebacks, install them prior to installing the log set.
The logs are fragile, especially after being exposed to heat.
Make sure the gas control valve is OFF and the heater is cool prior to conducting service.
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage or personal injury.
The burner must be correctly positioned before installing the log set. Make sure the burner is fully seated
and the pilot is properly aligned. See owner's manual for details on burner removal.
Installation – Oak vs. Birch
Both log sets are nearly identical in shape. The only difference is the paint scheme and some textural details.
Page 2 contains a picture of the birch log set installed. The installation pictures show the classic oak log set.
Log Set Overview – Classic Oak (sku# 94500771)
When installed, the ten (10) logs should appear as shown below.
Left Log
250-04918
Center Left Twig
250-04921
Left Twig
Front Left Log
250-04922
250-04916
Page 1 of 8
PB 42 CF Deluxe Log Set Inst.
Oak - sku# 94500771 - Birch - sku# 94500770
Center Log
250-04924
17602071 — 4/1/19
Packing List
10 Piece Log Set
Back Log
250-05078
Center Twig
250-04923
Right Twig
250-04920
Right Log
250-05079
Front Ember Chunk
250-04917
© Travis Industries, Inc.
Need help?
Do you have a question about the PB 42 CF Deluxe Log Set Inst and is the answer not in the manual?
Questions and answers