3Com 3CRWE62092A User Manual page 35

The following information appears in the Info tab:
Item
Driver version
Firmware version
MAC Address
IP Address
Card Type
Power Source
Network Type
Security Settings
WLAN Service Area
Channel
Network Name
Access Point MAC
Address
Power Management
Associated Signal
Strength
Data Rate
Viewing Configuration Information
Description
Useful for troubleshooting
Useful for troubleshooting
Unique hardware name for your PC Card.
Your computer's current IP address.
Type of client adapter; for example, PCMCIA or PCI.
AC power or battery power.
Access Point or Ad hoc.
Type of security set for the PC Card. For information on security,
see "Security Settings".
If the network type is Access Point, shows the currently associated
WLAN service area. For information on the WLAN service area,
see "Changing Network and Security Settings".
If the network type is Ad hoc, this item does not appear in the list.
Radio frequency (RF) channel.
If the network type is Ad hoc, shows the name of the ad hoc
network. For information on ad hoc networks, see "Setting up an
Ad Hoc Network".
If the network type is Access Point, this item does not appear in
the list.
Unique hardware name for the associated access point. If the
network type is Ad hoc, this field shows N/A.
Power mode. For more information on power modes, see
"Changing Power, Traffic, and Address Settings".
Indicates the strength of the radio signal. All light green indicates
the best signal; all dark green indicates no signal.
Data transfer speed. For example, 11 Mbps, 5.5 Mbps, 2 Mbps, or
1 Mbps.
35