128-Bit Dynamic Security Link Authentication; 128-Bit Dynamic Security Link Settings - 3Com 3CRWE62092A User Manual

30 C 4: S
HAPTER ETTING THE
W C C
IRELESS LIENT ONFIGURATION
To enter an encryption string:
1 In the Security settings window, select 128-bit Shared Key and click Next.
2 In the Encryptions Settings window, select Text Message.
3 Type the encryption string in the spaces provided.
4 Click Next when finished.
To enter hexadecimal keys:
1 In the Security settings window, select 128-bit Shared Key and click Next.
2 In the Encryptions Settings window, select Hexadecimal Keys.
3 Type the encryption key sequences in the spaces provided. You must enter key
sequences for all four keys.
4 Click one of the radio buttons to select a key to use for encrypting data from
your computer.
5 Click Next when finished.

128-bit Dynamic Security Link Authentication

128-bit Dynamic Security Link security can only be used with other
3Com 11 Mbps Wireless LAN clients and access points.
1 Ask your network administrator for the user name and password.
2 In the Security settings window, select 128-bit Dynamic Security Link and click Next.
3 In the Authentication Settings window, type the user name and password in the
spaces provided.
4 Enter the password again to confirm it.
5 Click Next when finished.

128-bit Dynamic Security Link Settings

128-bit Dynamic Security Link security requires a user name and password. Ask
your network administrator for the user name and password.
1 In the Network/Security window, select
Security setting list.
2 Click Apply.
3 In the next window, type the user name and password in the spaces provided.
4 Click OK when finished.
After you log in successfully the first time, Windows remembers the password the
next time you log in. Your network administrator may require you to log on
every time.
-bit Dynamic Security Link from the
128