Dyson Hot+Cool AM09 Quick Start Manual

Fan heater black/nickel

Hide thumbs Also See for Hot+Cool AM09:

Download this manual

12/29/21, 7:10 PM

AM09 Hot+Cool™ Fan

Heater Black/Nickel

Select a different machine

https://support.dyson.co.nz/support/am09/am09-black-nickel/using-your-dyson-machine-am09/quick-start-guide-video-am09/quick-start-guide-step-by-...

Dyson AM09 Support - Quick start guide, step by step | dyson.co.nz

Quick start guide, step by step

What's in the box?

1. Main body.

2. Instruction manual.

3. Base.

4. Remote control.

Assembling your Dyson fan heater

1. Lower the main body onto the base.

2. Once aligned, turn the main body clockwise to lock.

Standby ON/OFF

Airflow speed control

Cool mode

Thermostat control

1/5

Need help?

Do you have a question about the Hot+Cool AM09 and is the answer not in the manual?

Page 1 12/29/21, 7:10 PM Dyson AM09 Support - Quick start guide, step by step | dyson.co.nz Quick start guide, step by step AM09 Hot+Cool™ Fan Heater Black/Nickel What's in the box? 1. Main body. 2. Instruction manual. 3. Base. 4. Remote control.
Page 2 12/29/21, 7:10 PM Dyson AM09 Support - Quick start guide, step by step | dyson.co.nz Sleep timer Oscillation ON/OFF Personal heating mode Diffused mode Operating your Dyson fan heater 1. To operate, point the remote control toward the front of the base and press the standby ON/OFF button.
Page 3 12/29/21, 7:10 PM Dyson AM09 Support - Quick start guide, step by step | dyson.co.nz Oscillation control To start the appliance oscillating, press the oscillation control button. To stop the appliance oscillating, press it again. NB: The appliance will not oscillate when the control buttons are pressed.
Page 4 12/29/21, 7:10 PM Dyson AM09 Support - Quick start guide, step by step | dyson.co.nz Personal heating mode Press the narrow angle button to change from whole room heating to personal heating. Heating and cool modes work in this mode.
Page 5 12/29/21, 7:10 PM Dyson AM09 Support - Quick start guide, step by step | dyson.co.nz How to use the sleep timer To set the sleep timer, press and hold the timer button to select the desired time. When time reaches zero, the appliance will go into standby mode.