Related Manuals for mitty dairy melasty TK1-PS GE
Summary of Contents for mitty dairy melasty TK1-PS GE
- Page 1 Assembly Instructions for the Melasty Portable Milking Machine Model TK1-PS GE 315 E. Banks St Glennville, GA 30427 Tel: (912) 339-0173...
- Page 2 1.-– Unpack carefully the machine, removing every plastic wrapper. 2.– Screw in handle in the hole that is located on the back of the milking machine behind the motor. The gasoline motor mounted on the left of the milking machine is HEAVY.
- Page 3 3.-.Insert the metal arm with the hoses and milking cluster on the top of the milking machine. Insert gauge in the black rubber tube Gauge Metal arm with hoses and clusters Pulsator...
- Page 4 You many need to use Vaseline to help connect the hose to the air tank (1) and to the lid (2). The air hose needs to be inserted in the same lid entrance where you will find the milk stopper at the bottom.
- Page 5 6.– The pulsator has 2 nozzles, please connect the black pulsator dou- ble hose to the nozzles. 7.– Connect the milk hose coming from the milking cluster to the 2nd entrance of the lid.
- Page 6 This is how your machine will need to look like after you assembled all the parts together. The electric motor doesn’t need oil. The vacuum pump is dry and works with graphite pallets or vanes that you will have to replace every 6 or 8 months. It is important to clean your machine before using it.
- Page 7 8.– Turn on your machine and pull out the plug that is located on top of your milking cluster. 9.– At the back of your air tank you will find the vacuum regulator, turn it to the left or to the right to move the needle in the gauge to .45.
- Page 8 Proceed with the manual, how to start milking for the first time.
Need help?
Do you have a question about the melasty TK1-PS GE and is the answer not in the manual?
Questions and answers