Cdr-5000 Functions; Map Of Functions - FUTABA CDR5000 Instruction Manual

Map of Functions

Connect the input cords of CDR-5000 to the power source
and switch on the power source, and then CDR-5000 will
automatically turn on and show its opening screen.
10

CDR-5000 Functions

When a battery is
connected.
SET-UP screen will return to Data
screen or Graph screen automati-
cally about one minute after no key
operation is done.
Keep the button pressed until
INITIAL-SETTING screen
shows up.
Keep the button pressed until
INITIAL-SETTING screen
shows up.
Graph 1 screen
is shown.