Reference; Specifications - FUTABA CDR5000 Instruction Manual

Specifications

•Batteries
NiCd / NIMH batteries
•Input voltage
DC 12 - 16V (The guaranteed operating range is from
11V to 16V.)
•Charging current
DX port:
0.08 < Battery Voltage ≤ 18V: 0.1 -12A (0.01A step)
18 < Battery Voltage ≤ 27V: 0.1 - 8A (0.01A step)
27 < Battery Voltage ≤ 36V: 0.1 - 6A (0.01A step)
36 < Battery Voltage ≤ 43V: 0.1 - 5A (0.01A step)
43 < Battery Voltage ≤ 54V: 0.1 - 4A (0.01A step)
54 < Battery Voltage ≤ 62V: 0.1 - 3A (0.01A step)
TX&RX port:
0.05 - 2A (0.01A step)
•Charge-cut methods
DX port:
Detection by Delta Peak (Zero Delta, 3 - 50mV/cell)
Detection by battery temperature (25 - 75 degrees in
Celsius)
Detection by the maximum voltage (0.1 - 62V)
Detection by capacity (50 - 9999mAh)
•Discharging current
DX port:
0.1 < Battery Voltage ≤ 2.4V: 0.1 - 40A (0.01A step)
2.4 < Battery Voltage ≤ 7.5V: 0.1 - 40A (0.01A step)
7.5 < Battery Voltage ≤ 8.5V: 0.1 - 35A (0.01A step)
8.5 < Battery Voltage ≤ 10V: 0.1 - 30A (0.01A step)
10 < Battery Voltage ≤ 12V: 0.1 - 25A (0.01A step)
12 < Battery Voltage ≤ 15V: 0.1 - 20A (0.01A step)
15 < Battery Voltage ≤ 20V: 0.1 - 15A (0.01A step)
20 < Battery Voltage ≤ 30V: 0.1 - 10A (0.01A step)
30 < Battery Voltage ≤ 40V: 0.1 - 7.5A (0.01A step)
40 < Battery Voltage ≤ 50V: 0.1 - 6A (0.01A step)
50 < Battery Voltage ≤ 60V: 0.1 - 5A (0.01A step)
60 < Battery Voltage ≤ 62V: 0.1 - 4A (0.01A step)
TX&RX port:
below 10V: 0.1 - 5A (0.01A step)
above 10V: 0.1 - 3A (0.01A step)

Reference

*Specifications and ratings are subject to change without prior notice.
•Discharge-cut methods
Detection by voltage: 0.8V/cell, 0.85V/cell, 0.9V/cell
Detection by time: 10 - 59940 seconds (999 minutes)
•Measurable temperature range
5 - 99 degrees Celsius
•Measurable humidity range
20 - 95%
•Expansion terminals
Thermo Stand port (Thermo Stand is an option)
Terminal Harness port (Terminal Harness is included
in a set)
PC port (only for the factory)
Printer port (only for factory)
•Screens
192 x 128 dot graphic LCD with backlight
•LEDs
Red : charging at DX or TX&RX
Blue: discharging at DX or TX&RX
•Power consumption
Less than 8W at 12V (at idle)
•Operating temperature
5 - 40 degrees Celsius
•Storage temperature
-20 - 60 degrees Celsius
•Size
170 x 170 x 83mm (excluding cords and terminals)
•Weight
1200g
•Protection circuits
Protection circuits against overload, reverse connec-
tion and overheat
43