Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Maytronics Niya Sonar 30
Summary of Contents for Maytronics Niya Sonar 30
- Page 1 User Manual - Robotic Pool Cleaner...
-
Page 2: Table Of Contents
WHAT'S IN THE BOX Filter Basket Charger Niya Pool Cleaner Hook User Manual Warranty Hook x1 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ................ 3 FIRST TIME USE ......................4 CLEANING MODE SELECTION ................... 5 CLEAN THE POOL CLEANER ..................5 LED INDICATORS ......................6 STORAGE ........................ -
Page 3: Important Safety Instructions
Please adhere to the following warnings and cautions before you use the Niya Pool Cleaner. Use the device only according to these safety instructions. Maytronics is not liable for any loss or injury caused by improper use of the device. Use only the original battery and battery charger provided. -
Page 4: First Time Use
2 FIRST TIME USE Charge the robot until the Unplug the charger and press the flashing green LED becomes solid. button on the robot to activate. Put the robot in the pool Attach the hook to a pole until it finishes cleaning. and pull the robot to the waterline. -
Page 5: Cleaning Mode Selection
3 CLEANING MODE SELECTION The pool cleaner cleans the floor, walls, and waterline, up to 2 hours. 4 CLEAN THE POOL CLEANER Place the pool cleaner on a solid surface at the poolside. Make sure it is switched OFF. Remove the Take out the robot lid. -
Page 6: Led Indicators
5 LED INDICATORS The table below outlines the LED indicators on the robot and their significance. LED Color Solid Display Flashing Display Flashing 1 sec: Device Starting Blue Device Working Flashing 3 secs: Device Idle Red Device Error Green Device Charging Fully Charged Yellow Low Battery Device Stuck Purple... -
Page 7: Specifications
7 SPECIFICATIONS Specification Details Pool Length Up to 10m / 32.8 ft Water Depth 0.4 m–2.5 m (1.3 ft–8.2 ft) Power Adapter/AC Input 100–240 VAC, 50–60 Hz Power Adapter/DC Output 26 V / 28 V, 2.3 A Power Adapter/Rated Power 59.8 W / 64.4 W Lithium Battery 7800 mAh... -
Page 8: Impeller Cleaning Process
8 IMPELLER CLEANING PROCESS When the red LED indicator starts flashing and the robot announces a "Pumping motor issue," the likely cause could be a clogged impeller. This causes the robot to struggle to vacuum and climb even if the filter is clean. Please follow the instructions below carefully to resolve the issue. -
Page 9: Battery Replacement
9 BATTERY REPLACEMENT Before inserting a new battery, clean up the water droplets and sand or other foreign objects from the device. Before replacement of the battery, ensure the complete evaporation of moisture. To replace the battery, proceed as follows: Remove the six screws fixed to the holding plate and extract the used battery. -
Page 10: Troubleshooting
10 TROUBLESHOOTING Question Answer What pool is the Sonar 30 suitable for? The Sonar 30 is recommended for standard pools up to 32.8 ft in length. Why doesn’t the cleaner respond after The battery may have discharged due to turning on the machine? extended delivery or storage. - Page 11 10 TROUBLESHOOTING Question Answer Why does the cleaner automatically switch The device is designed to shut off off after a few hours of charging? automatically in 10 minutes after being fully charged to protect the battery and ensure its lifespan. Why is the robot not cleaning effectively? The device may absorb a significant amount of debris quickly when placed in a dirty pool.
Need help?
Do you have a question about the Niya Sonar 30 and is the answer not in the manual?
Questions and answers